Passer au contenu principal
Quitter

Bienvenue dans l’univers Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
Se connecter Créer un compte Connexion au compte Premier Connexion au programme de partenariat

How to Access the UEFI and BIOS Firmware Setup Screens with Microsoft Windows 10 and 11

Résumé: The following article provides information about accessing the Unified Extensible Firmware Interface (UEFI) or BIOS with Microsoft Windows 10 or 11 on a Dell computer.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.
Consulter d’autres ressources

Instructions

The Windows 11, and Windows 10 operating systems allow you to boot into the UEFI BIOS firmware setup on supported Dell computers. You can use the integrated advanced startup options.

NOTE: Some Dell computers may not support this feature because the UEFI and Serial ATA (SATA) settings cannot be changed in the BIOS.
|

  1. Turn on the computer.
  2. At the Dell logo, tap the F2 key several times.

The images in this article are displayed in English for illustration purposes only.

  1. Click Start and then select Settings.
  2. Click Update & Security.

    Windows Settings

  3. On the left side, click Recovery.
  4. Under Advanced start-up, click Restart Now.

    Windows 10 Recovery

  5. Click Troubleshoot.

    Windows 10 Troubleshoot

  6. Click Advanced options.

    Windows 10 Advance Startup

  7. Select UEFI Firmware Settings.

    Windows 10 EFI Settings

  8. Click Restart to restart the computer and enter UEFI. (BIOS)
Note: If your operating system has become corrupted, you cannot go further than the Windows sign in screen. However, there is still an opportunity to enter the Advanced Options from the sign-in screen.

  1. Boot to the sign-in screen.

  2. Click the Power button on the sign-in screen.

  3. Press and hold down the Shift key and click Restart.

  4. Select UEFI Firmware Settings.

Informations supplémentaires

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

Produits concernés

Alienware, Inspiron, Legacy Desktop Models, OptiPlex, Vostro, XPS, G Series, G Series, Alienware, Inspiron, Latitude, Vostro, XPS, Legacy Laptop Models, Fixed Workstations, Mobile Workstations
Propriétés de l’article
Numéro d’article: 000126121
Type d’article: How To
Dernière modification: 10 Oct 2024
Version:  14
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.