Certains numéros d’article ont peut-être changé. Si ce n’est pas ce que vous recherchez, essayez de faire une recherche sur tous les articles. Rechercher des articles
The easiest way to check compatibility is to look at the logo on the USB receiver and compare that to the logo on the bottom of the keyboard or mouse (Figure 1).
Figure 1: Dell Universal Pairing Dongle
Dell Universal Pairing devices are not compatible with the Logitech Unifying Technology devices (Figure 2).
Figure 2: Compatibility Matrix
Back to top
3. Download and Installing the Dell Universal Pairing Software.
This section provides instructions for downloading and installing the Dell Universal Pairing Software.
NOTE: In order to be able to install and use the Dell Universal Receiver Control Panel software, you cannot have the Dell Peripheral Manager software installed simultaneously. The Dell Peripheral Manager software has to be removed before installation of the Dell Universal Receiver Control Panel software,
Touch or click Download to the right of the Dell Universal Receiver Control Panel listing.
Depending on your browser, you get different options. The following steps are based on using the Chrome browser.
Once the Dell Peripheral Manager is downloaded, touch or click the file that is listed at the bottom of the screen to start the installation process, and then follow the prompts.
4. How to Pair the Dell Universal Keyboard and Mouse
Start the Dell Universal Receiver Control Panel and plug in the Dell Universal USB receiver.
When there are devices that are paired already, remove the pairing by clicking the "Remove device" button (Figure 3). Figure 3: Remove Device
Touch or click Add New Device (Figure 4). Figure 4: Add New Device
Follow the instructions shown on the screen (Figure 5).
Turn off all the keyboards and mice (Figure 5).
When pairing a mouse, hold a mouse button and press the on button, hold the key in your mouse for 3 seconds until pairing is complete (Figure 5).
When pairing a keyboard, hold down a keyboard key and press the on button, hold the key on the keyboard for 3 seconds until the pairing is complete (Figure 5). Figure 5: Add New Device Instructions