Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Unable to Switch From Wireless to Ethernet When Docked

Résumé: Steps to enable wireless network connection switch to wired network connection when it is docked.

Cet article a peut-être été traduit automatiquement. Si vous avez des commentaires concernant sa qualité, veuillez nous en informer en utilisant le formulaire au bas de cette page.

Contenu de l’article


Symptômes

Unable to Switch from Wireless to Ethernet When Docked

You may be unable to switch between Wireless and Ethernet network connection automatically when you dock your system. The on board Ethernet connection works as well as the Wireless network connection. After the system is docked the Wireless network connection remains on instead of switching to the Ethernet connection of the docking station. Manually switching (FN + PrtScr) does not disable the Wireless connection and after disabling Wireless manually the system will reconnect to the Wireless network even while docked.

This has been reported on the following models:

  • Latitude 3470
  • Latitude 3570
  • Latitude E5270
  • Latitude E5470
  • Latitude E5570
  • Latitude E7270
  • Latitude E7470
  • Precision 3510
  • Precision 7510
  • Precision 7710

Cause

Cause information is not available.

Résolution

Install the Dell WLAN HotKey Driver

You can download and install the Dell WLAN HotKey Driver from the Dell Support Website, where you can select your system, then Drivers and Downloads, Network folder to locate and download the WLAN Radio Switch Driver.

Use the steps below to enable WLAN Control in BIOS if not already done:

  1. Tap the F2 key while powering up the system
  2. Once in the BIOS please click on Power Management
  3. You will then click on Wireless Radio Control
  4. Once here please ensure that the Control WLAN radio option is selected
  5. Please click Apply and then Exit

Once complete, the system should automatically switch from Wireless to Ethernet when docked.

Informations supplémentaires

Propriétés de l’article


Produit concerné

Latitude 3470, Latitude 3570, Latitude E5270, Latitude E5470, Latitude E7270, Latitude E7470, Precision 3510, Precision 7510, Precision 7710

Dernière date de publication

08 janv. 2024

Version

4

Type d’article

Solution