Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits

Dell Thunderbolt Dock TB16 - Firmware Update Procedure

Résumé: Information on the best way to update the Dell Thunderbolt 3 TB16 docking station firmware using the Dell Support site.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.

Symptômes

Symptom

This article provides detailed steps on how to update the Dell TB16 docking firmware and a solution to the problems that may be encountered during the update process. The steps below are required to rule out the software on your system/dock is causing your docking issue.

Affected systems

(Thunderbolt 3 capable Dell Notebooks that can use the TB16 docking Station.)

SLN319674_en_US__1TB16_BK

(Figure.1 TB16 docking station)

 

Résolution

Solution

Before you run through the update process, you need to make sure that:

  1. You have administrator rights on your notebook or access to an account on your notebook that does

  2. You have updated to the latest BIOS version on your notebook before you work on the dock. To download and install the latest BIOS:

    Warning: Dell recommends disconnecting any external devices like external hard disk drives, printers, scanners before updating the BIOS.
     
    Warning: Dell laptops must have the battery installed and charged to at least 10% before you begin the BIOS update. Dell recommends connecting the laptop to AC power before proceeding with the update process.
     
    SLN319674_en_US__2icon Note: To learn more about updating the BIOS on a Dell computer, see the Dell knowledgebase article Dell BIOS Updates.
  1. Browse to the Dell Drivers & Downloads page:

  2. Ensure you have the correct System Type selected

  3. Select the Operating System

  4. Under Category, select BIOS

  5. Locate the latest System BIOS

  6. Click Download and save the file to your computer

  7. Open File Explorer and browse to the location where the downloaded file is saved

  8. Double-click the BIOS setup file and follow the on-screen instructions to complete the installation process

Updating the TB16's firmware

  1. Browse to the Dell Drivers & Downloads page:

  2. Click on the Browse All Products link

SLN319674_en_US__3Support_Site_Page_BK

(Figure.2 Support Site Page)

  1. Select Electronics & Accessories from the Pop-Up

SLN319674_en_US__4All_Products_BK

(Figure.3 All Products Pop Up)

  1. Navigate to PC & Tablet Accessories on the Pop-Up

SLN319674_en_US__5Electronics_Accessories_BK

(Figure.4 Electronics & Accessories Pop Up)

  1. Click on the Dell Thunderbolt Dock TB16 link to open its support page

SLN319674_en_US__6PC_Tablet_Accessories_BK

(Figure.5 PC & Tablet Accessories Pop Up)

  1. Click on the Drivers & Downloads link to open the driver's page

SLN319674_en_US__7TB16_Drivers_Page_BK

(Figure.6 Dell Thunderbolt Dock TB16 Support Page)

  1. Go to the Dell Thunderbolt Dock TB16 Firmware Update Utility and click on Download and save the file to your computer

SLN319674_en_US__8TB16_Firmware_Link_BK

(Figure.7 Dell Thunderbolt Dock TB16 Firmware Utility)

  1. Open File Explorer and browse to the location where the downloaded file is saved

  2. Right-click the Utility setup file, run the file as an administrator and follow the on-screen instructions to complete the installation process

  3. Click Update (The update process may cause docking to be unusable while it's updating.)

SLN319674_en_US__9TB16_Firmware_Update_BK

(Figure.8 Firmware Update Utility)

  1. Update complete, click on Exit and please re-plug the USB type-c port cable before using the TB16 dock for the first time

SLN319674_en_US__10TB16_Firmware_Update_Complete_BK

(Figure.9 Update Complete)

Resolving an install error

If an error occurs during the firmware update, giving an error message such as "Reading ASMedia USB 3.0 Host Controller Firmware failed".

SLN319674_en_US__11TB16_Firmware_Update_Error_BK

(Figure.10 Root Cause: Docking connection does not set up at Thunderbolt Control Center)

Solution

  1. Open the Thunderbolt Control Center Application (The software can be downloaded and installed through the Microsoft Store.)

  2. Click Not Connected to set

  3. Set up the Dell Thunderbolt Cable to the Dell Thunderbolt Dock to be connected only once or always, and then click on OK to apply the changes.

 

Produits concernés

G Series, Inspiron, Latitude, Vostro, XPS, Mobile Workstations
Propriétés de l’article
Numéro d’article: 000139915
Type d’article: Solution
Dernière modification: 21 Feb 2021
Version:  4
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.