Configure the Lighting Features on the Dell G-Series 5000 Desktop

Table of Contents:

1. New Light features have been added to the Dell G5 5000 series desktops
2. Configuring the lighting feature on the Dell G5 5000 series desktops

New Light features have been added to the Dell G5 5000 series desktops

Dell has new lighting features on the G5 5000 series gaming desktops. This includes a light bar on the front of the chassis and lighting the interior of the chassis. (Visible through a transparent panel in the left-hand side of the chassis.)

Configuring the lighting feature on the Dell G5 5000 series desktops

The following instructions take you step-by-step through the configuration of the new lighting feature:

1. Open up the Alienware Command Center (ACC) application on your device.

2. Go to the FX tab (1).

   

3. Click the lighting menu (2).

4. Select your model type: (3)

   (G5 5000)

   

5. Tick the checkbox next to All Zones to change the lighting color (4).

6. Changing the R (Red), G (Green), and B (Blue) values, changes the color of the lighting (5).

   (The recommended default color is pure blue - R = 0, G = 0, B = 255)

   Note: There is no means to turn the lighting off. You can adjust the color to show black by adjusting the color values to R = 0, G = 0, B = 0.

   

7. Tick the checkbox next to Front Bezel to make changes that only affect the front lighting module (6).

8. Using the brightness slider, you can set the front light to your wanted level (7).

   (The tick next to All Zones should have disappeared and the preview picture should now call out the external and internal light as 1 and 2)

   

Back to Top