Precision 5810 or 3620 Thunderbolt Card Installed in PCIe Slot 1
Résumé: If the Thunderbolt 2.0 PCIe expansion controller card is installed in the incorrect slot on the motherboard for the Precision T5810 or T3620, the card does not recognize or function properly. This article provides additional information about this issue and guidance on proper installation for the Thunderbolt 2.0 card. ...
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Symptômes
Thunderbolt 2.0 card installed in PCIe slot 1
A Precision Tower 5810 user reported that when they received their system, the Thunderbolt 2.0 card was not recognized by the Thunderbolt application and that the card did not function to its full capability.
It was determined that the card was installed in the PCIe 3.0 slot (SLOT 1). The Thunderbolt 2.0 card setup guide indicates that for proper operation the card must be installed into the PCIe 2.0 slot (SLOT 5) (Figure 1):
Figure 1: Installing the Thunderbolt 2.0 add-in card in Slot 5
Cause
No cause information
Résolution
The Thunderbolt Add-In-Cards Setup Guide indicates that this card should be in PCIe slot 5 for both the Precision Tower 5810 and 7810. For the Precision Tower 3620, the Thunderbolt 2.0 card should be installed in slot 3 for it to function properly.
If you encounter this issue, ensure that the Thunderbolt 2.0 card is installed in the correct PCIe slot.
Once the Thunderbolt controller card was installed into the correct PCIe slot, the card was correctly identified by the Thunderbolt application and functioned normally.
Produits concernés
Dell Precision Tower 3620, Precision Tower 5810Propriétés de l’article
Numéro d’article: 000129323
Type d’article: Solution
Dernière modification: 06 juin 2024
Version: 5
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.