How to Stop and Start Services in Dell Security Management Server Virtual
Résumé: Dell Security Management Server Virtual services may be stopped or started by following these instructions.
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Symptômes
This article covers how to stop and start services in Dell Security Management Server Virtual (formerly Dell Data Protection | Virtual Edition).
Affected Products:
- Dell Security Management Server Virtual
- Dell Data Protection | Virtual Edition
Cause
Not applicable
Résolution
Dell Security Management Server Virtual services may be stopped and started for:
- Modifications to the server
- Maintenance
- Troubleshooting
The process to stop and start Dell Security Management Server Virtual services varies between v11.3.0 and Later, v10.2.13 to 11.2.0, v10.2.10 to 10.2.12, v10.1.0 to 10.2.9, v9.11.0 to 10.0.0, and v9.10.1 and Earlier. Click the appropriate version for specific steps. For versioning information, reference How to Identify the Dell Data Security / Dell Data Protection Server Version.
v11.3.0 and Later
A Dell Security Management Server Virtual administrator can either Stop Services or Start Services. Click the appropriate task for more information.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Stop Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to stop. Once services are fully stopped, all services show a status of Stopped.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Start Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to start. Once services are fully started, all services show a status of Running.
v10.2.13 to 11.2.0
A Dell Security Management Server Virtual administrator can either Stop Services or Start Services. Click the appropriate task for more information.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Stop Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to stop. Once services are fully stopped, all services show a status of Stopped.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Start Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to start. Once services are fully started, all services show a status of Running.
v10.2.10 to 10.2.12
A Dell Security Management Server Virtual administrator can either Stop Services or Start Services. Click the appropriate task for more information.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Stop Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to stop. Once services are fully stopped, all services show a status of Stopped.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Start Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to start. Once services are fully started, all services show a status of Running.
v10.1.0 to 10.2.9
A Dell Security Management Server Virtual administrator can either Stop Services or Start Services. Click the appropriate task for more information.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Stop Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to stop. Once services are fully stopped, all services show a status of Stopped.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Start Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to start. Once services are fully started, all services show a status of Running.
v9.11.0 to 10.0.0
A Dell Security Management Server Virtual administrator can either Stop Services or Start Services. Click the appropriate task for more information.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Stop Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to stop. Once services are fully stopped, all services show a status of Stopped.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
delluser - Password:
delluser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Start Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to start. Once services are fully started, all services show a status of Running.
v9.10.1 and Earlier
A Dell Security Management Server Virtual administrator can either Stop Services or Start Services. Click the appropriate task for more information.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
ddpuser - Password:
ddpuser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Stop Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to stop. Once services are fully stopped, all services show a status of Stopped.
- Log in to the Dell Enterprise Server Virtual administration console.
Note:
- The default credentials for Dell Security Management Server Virtual are:
- Username:
ddpuser - Password:
ddpuser
- Username:
- An administrator can change the default password within the product’s virtual appliance menu.
- From the Main Menu, select Basic Configuration and then press Enter.
- Select Start Application and then press Enter.
- Select Yes and then press Enter.
- It may take several minutes for the services to start. Once services are fully started, all services show a status of Running.
To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.
Informations supplémentaires
Vidéos
Produits concernés
Dell EncryptionPropriétés de l’article
Numéro d’article: 000124905
Type d’article: Solution
Dernière modification: 28 avr. 2023
Version: 14
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.