Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits

Troubleshooting Headphone or Microphone Jack Issues on a Dell Latitude and OptiPlex

Résumé: This article provides the information about how to resolve headphone or microphone jack issues on a Dell Latitude and OptiPlex computer.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.

Instructions

Using a headphone/microphone on a OptiPlex

By design, when a headphone or headset is connected to the audio port on the front panel, the rear audio port is disabled. This allows for private audio using headphones, and the rear jack is enabled when the headphones are disconnected.

Using a headphone/microphone on a Latitude laptop

The two most common types of connectors for audio jacks are a two ring (three conductor) connector and a three ring (four conductor) or Tip, Ring, Ring Sleeve (TRRS) connector. The difference between the two can be seen in the image below.

TRSS connector
Figure 1: Example of two different types of headphone or microphone connectors

Most Latitude laptops have a microphone/headphone combo jack. Headsets with a three-ring TRRS connector support both audio playback and recording using the microphone on the headset. The E-series docking stations have a separate headphone and microphone port. This setup requires a headset that supports a two-ring connector, one each for headphone and microphone.

In order to use a headset/microphone combo device on the Latitude laptops, you must disable the internal microphone in Windows sound properties.

  1. Press Windows + Q to open the search panel.
  2. Type control panel and press Enter.
  3. In the Control Panel, click Hardware and Sound, and then click Sound.
  4. Select the Recording tab.
  5. Recording tab
    Figure 2: Screenshot of audio properties in Windows

  6. Choose the Microphone Array on the IDT High Definition Audio CODEC device.
  7. Click Properties to open the Microphone Array Properties window.
  8. From the General tab, use the dropdown menu and choose Don't use this device (disable).

    Microphone Array
    Figure 3: Screenshot of microphone array properties in Windows

  9. Click Apply.
  10. Click OK to exit the Microphone Array Properties window.
  11. Click OK to exit the Sound properties window.

If the issue persists, see the Dell Knowledge Base articles below:

Produits concernés

OptiPlex, Latitude
Propriétés de l’article
Numéro d’article: 000137382
Type d’article: How To
Dernière modification: 20 Feb 2025
Version:  13
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.