PowerEdge: How Reconfigure a Virtual Disk or Add More Hard Drives.

Steps:

1. Access the BIOS by F2 > Device Settings
   
   
   Figure 1: Expand Virtual Disk 1
2. Select RAID Controller
   
   Figure 2: Expand Virtual Disk 2
3. In the Dashboard view, select Main Menu
   
   Figure 3: Expand Virtual Disk 3
4. Select Virtual Disk Management
   
   Figure 4: Expand Virtual Disk 4
5. Select the virtual disk that is changed
   
   Figure 5: Expand Virtual Disk 5
6. In the drop-down, select Reconfigure Virtual Disks and press GO button
   
   Figure 6: Expand Virtual Disk 6
7. Select the RAID Level and level and press button Choose the Operation
   
   Figure 7: Expand Virtual Disk 7
8. Select the disks to be added at VD and press button Apply Changes.
   
   Figure 8: Expand Virtual Disk 8
9. Confirm the operation and click in YES.
   
   Figure 9: Expand Virtual Disk 9
10. Press the button Start Operation
    
    Figure 10: Expand Virtual Disk 10
11. Press button OK to complete the operation.
    
    Figure 11: Expand Virtual Disk 11
12. To view, see the status of the virtual disk 
    
    Figure 12: Expand Virtual Disk 12

Related articles and videos:

• PowerEdge Tutorials: Physical Disks and RAID Controller (PERC) on Servers
• Performing Online Capacity Expansion on PERC controller
• Dell OpenManage Storage Services 8.2 - RAID 10 Virtual Disk Expansion by Adding Physical Disks