Siirry pääsisältöön
Kirjaudu ulos

Tervetuloa Dellin asiakkaaksi

Oma tili
  • Tee tilauksia nopeasti ja helposti
  • Tarkastele tilauksia ja seuraa lähetyksen tilaa
  • Luo tuoteluettelo ja käytä sitä
Kirjaudu sisään Luo tili Premier-kirjautuminen Kumppaniohjelman sisäänkirjautumissivu
Ota yhteyttä

How to Configure Proxy Settings in Dell Security Management Server / Dell Data Protection Enterprise Edition

Yhteenveto: Proxy settings may be configured for Dell Security Management Server / Dell Data Protection Enterprise Edition Server using these instructions.

Tämä artikkeli koskee tuotetta Tämä artikkeli ei koske tuotetta Tämä artikkeli ei liity tiettyyn tuotteeseen. Tässä artikkelissa ei yksilöidä kaikkia tuoteversioita.
Tutustu muihin resursseihin

Oireet

This article explains how to enable proxy usage for security server processes in Dell Security Management Server (formerly Dell Data Protection | Enterprise Edition Server).

Affected Products:

Dell Security Management Server
Dell Data Protection | Enterprise Edition Server

Affected Operating Systems:

Windows

Syy

Not applicable.

Tarkkuus

Dell Security Management Server proxy settings may be configured to:

  • Validate on-the-box product licenses.
  • Communicate with the Advanced Threat Prevention (ATP) tenant.
  • Communicate with an external syslog server.
Note:
  • Volume product licenses do not require external validation.
  • ATP Tenant is only used with Dell Endpoint Security Suite Enterprise.
  • Proxy settings may require configuration for more than one function.

Click the appropriate Dell Security Management Server version for proxy configuration steps. For versioning information, reference How to Identify the Dell Data Security / Dell Data Protection Server Version.

v9.4.0 and Later

To update the proxy settings:

  1. From the Dell Security Management Server, back up C:\Program Files\Dell\Enterprise Edition\Security Server\conf\application.properties.
Note: The application.properties location may differ from the example if another directory was chosen during install.
  1. Go to %SystemRoot%\System32.
  2. Right-click Notepad.exe and then select Run as administrator.

Run as administrator

  1. Click File and then select Open.

Open

  1. In the Open UI:
    1. Go to the folder C:\Program Files\Dell\Enterprise Edition\Security Server\conf.
    2. Change the menu selection from Text Documents (*.txt) to All Files (*.*).
    3. Select the application.properties file.
    4. Click Open.

Open UI

  1. Locate the #Proxy server settings.

Locating proxy server settings

  1. At proxy.server.enabled=false, delete false and type true.

Updating proxy server enabled

  1. At proxy.server.host=, type the fully qualified domain name (FQDN) of the proxy server.

Updating the proxy server host

Note: The example, proxy.company.com, will differ from the FQDN in your environment.
  1. At proxy.server.port.ssl=, type the proxy server’s SSL port.

Updating the proxy server SSL port

Note: The example, 443, may differ from the port in your environment.
  1. At proxy.server.port.http=, type the proxy server’s HTTP port.

Updating the proxy server's HTTP port

Note: The example, 80, may differ from the port in your environment.
  1. If the proxy server requires authentication, go to Step 11A. If the proxy server does not require authentication, go to Step 12.
    1. At proxy.server.username=, type the proxy server’s username.

Updating the proxy server username

Note: The example, proxyusername, may differ from the username in your environment.
  1. At proxy.server.password=, replace ENC with CLR.

Updating the proxy server password

  1. At proxy.server.password=, replace the alphanumeric information between CLR() with the proxyusername’s password.

Updating the proxy server password

Note: The example, proxypassword, may differ from the password in your environment. Once the Dell Security Server service is restarted, the password is encrypted.
  1. Click File and then select Save.

Save

  1. Click File and then select Exit.

Exit

  1. Restart the Dell Security Server service.
Note: For more information, reference How to Stop and Start Services in Dell Security Management Server / Dell Data Protection Enterprise Edition Server.
v8.5.1 to 9.3.0

To update the proxy settings:

  1. From the Dell Security Management Server, back up C:\Program Files\Dell\Enterprise Edition\Security Server\conf\application.properties.
Note: The application.properties location may differ from the example if another directory was chosen during install.
  1. Go to %SystemRoot%\System32.
  2. Right-click Notepad.exe and then select Run as administrator.

Run as administrator

  1. Click File and then select Open.

Open

  1. In the Open UI:
    1. Go to the folder C:\Program Files\Dell\Enterprise Edition\Security Server\conf.
    2. Change the menu selection from Text Documents (*.txt) to All Files (*.*).
    3. Select the application.properties file.
    4. Click Open.

Open UI

  1. Locate the #Proxy server settings.

Locating proxy server settings

  1. At proxy.server.enabled=false, delete false and type true.

Updating proxy server enabled

  1. At proxy.server.host=, type the fully qualified domain name (FQDN) of the proxy server.

Updating the proxy server host

Note: The example, proxy.company.com, will differ from the FQDN in your environment.
  1. At proxy.server.port.ssl=, type the proxy server’s SSL port.

Updating the proxy server SSL port

Note: The example, 443, may differ from the port in your environment.
  1. At proxy.server.port.http=, type the proxy server’s HTTP port.

Updating the proxy server HTTP port

Note: The example, 80, may differ from the port in your environment.
  1. If the proxy server requires authentication, go to Step 11A. If the proxy server does not require authentication, go to Step 12.
    1. At proxy.server.username=, type the proxy server’s username.

Updating the proxy server username

Note: The example, proxyusername, may differ from the username in your environment.
  1. At proxy.server.password=, type the proxyusername’s password.

Updating the proxy server password

Note: The example, proxypassword, may differ from the password in your environment. Once the Dell Security Server service is restarted, the password is encrypted.
  1. Click File and then select Save.

Save

  1. Click File and then select Exit.

Exit

  1. Restart the Dell Security Server service.
Note: For more information, reference How to Stop and Start Services in Dell Security Management Server / Dell Data Protection Enterprise Edition Server.

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

Lisätietoja

 

Videot

 

Tuotteet, joihin vaikutus kohdistuu

Dell Encryption
Artikkelin ominaisuudet
Artikkelin numero: 000126363
Artikkelin tyyppi: Solution
Viimeksi muutettu: 20 jouluk. 2022
Versio:  13
Etsi vastauksia kysymyksiisi muilta Dell-käyttäjiltä
Tukipalvelut
Tarkista, kuuluuko laitteesi tukipalveluiden piiriin.