Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos

PowerEdge: Update Firmware Via HTTPS Using iDRAC 7-8-9

Resumen: This article provides a guide to updating a server's firmware using the Integrated Dell Remote Access Controller 7, 8 or 9 using the online update catalog and a HTTPS connection.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.

Instrucciones

Table of contents

  1. How to perform a manual update

  2. How to enable automatic updates


Other methods to update a Dell EMC PowerEdge server firmware and drivers are available in Updating Firmware and Drivers on Dell EMC PowerEdge Servers.


General Introduction


The iDRAC allows the firmware of the local server to be remotely updated.
This article explains how to use the HTTPS location type to update the firmware using a Dell Update Package.
FTP and HTTP protocols are still options to connect to the Dell online catalog file.
The online Dell Update Packages (DUPs) requires an HTTPS connection to download.

HTTPS location option requires iDRAC9 firmware version 3.30.30.30, iDRAC8 firmware version 2.63.60.61, and iDRAC7 firmware version 2.63.60.62 or newer firmware versions.

For IDRAC8, iDRAC Enterprise license or higher license level is required to use any remote update location (Network Share, FTP, TFTP, HTTP, or HTTPS).

With IDRAC8 Express license, only local location is available for use:

Idrac8 Express License Upload options
Figure 1: Idrac8 Express License Upload options

With IDRAC8 Enterprise License, local and remote methods are available for use:

Idrac8 Enterprise License Upload options
Figure 2: Idrac8 Enterprise License Upload options
 

How to perform a manual update

  1. Log in to the iDRAC web interface
  2. Navigate to the update menu:
    • iDRAC9: Maintenance → System Update
    • iDRAC8 and iDRAC7: Overview → iDRAC Settings → Update and Rollback
  3. Select HTTPS
  4. HTTPS Address is downloads.dell.com
  5. Click the Check for Update button to find new updates.
  6. Once connected to the online catalog, a list of updates is presented.
  7. Select individual updates or select all the updates
  8. Check Install, Install and Reboot, or Install Next Reboot.
  9. The iDRAC puts one or more update tasks in the Job Queue.
iDRAC9 System Update Screen - Manual Update Tab:
iDRAC9 System Update Screen - Manual Update Tab
Figure 3: iDRAC9 System Update Screen - Manual Update Tab

iDRAC8 and iDRAC7 System Update Screen - Manual Update Tab:
iDRAC8 and iDRAC7 System Update Screen - Manual Update Tab
Figure 4: iDRAC8 and iDRAC7 System Update Screen - Manual Update Tab
 

iDRAC9 - How to Update Via HTTPS

Duration: 00:00:54 (hh:mm:ss)
When available, closed caption (subtitles) language settings can be chosen using the CC icon on this video player.


Back to the Table of Contents
 
 

How to enable automatic updates

iDRAC Enterprise license or higher license level is required to schedule automatic updates.

You can create a periodic recurring schedule for iDRAC to check for new firmware updates.
At the scheduled date and time, iDRAC connects to the specified destination, checks for updates, and applies or stages all applicable updates.
 
  1. Log in to the iDRAC web interface
  2. Navigate to the update menu:
    • iDRAC9: Maintenance System Update > Automatic Update. The Firmware Update page is displayed.
    • iDRAC8 and iDRAC7: Overview > iDRAC Settings > Update and Rollback. The Firmware Update page is displayed.
  1. Click the Enable Automatic Update option.
  2. Select the Server Reboot type
    • Schedule Updates — Stage the firmware updates but do not reboot the server.
    • Schedule Updates and reboot Server —Enables server reboot after the firmware updates are staged.
  3. Select an HTTPS location.
  4. HTTPS address is downloads.dell.com
  5. In the Update Window Schedule section, specify the start time for the firmware update and the frequency of the updates (daily, weekly, or monthly). For information about the fields, see the iDRAC Online Help.
  6. Click Schedule Update. The next scheduled job is created in the job queue. Five minutes after the first instance of the recurring job starts, the job for the next time period is created.

iDRAC9 System Update Screen - Automatic Update Tab:

iDRAC9 System Update Screen - Automatic Update Tab
Figure 5: iDRAC9 System Update Screen - Automatic Update Tab

iDRAC7/8 System Update Screen - Automatic Update Tab:

iDRAC7/8 System Update Screen - Automatic Update Tab
Figure 6: iDRAC7/8 System Update Screen - Automatic Update Tab

Back to the Table of Contents
 

Productos afectados

iDRAC7, iDRAC8, iDRAC9
Propiedades del artículo
Número del artículo: 000130533
Tipo de artículo: How To
Última modificación: 23 sept 2024
Versión:  11
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.