Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos

BIOS Settings to Allow PXE Boot on Dell Latitude Laptops

Resumen: This article serves as a guide to configure the BIOS settings to allow for PXE boot on Dell Latitude laptops.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.

Síntomas

How to access the BIOS or UEFI (also known as System Setup)?

To access the BIOS or UEFI on a Dell computer, press the F2 key several times at the Dell logo screen during startup.
Alternatively, you may press the F12 key several times at the Dell logo screen during startup and select BIOS Setup or System Setup from the menu.

Once you are in BIOS screen, the following BIOS settings should be in place for PXE boot on Latitude laptops. There are different BIOS User Interface found on Latitude laptop depending on the model you use.


NOTE: Ensure you have downloaded and installed the latest BIOS update available for your Latitude laptop from Dell Support | Drivers and Downloads website under the BIOS category.

Causa

Cause information is not available.

Resolución

Enable PXE boot in BIOS for Latitude 7x10 and 7x00

  1. Go to General > Boot Sequence, then select to enable Windows Boot Manager (Figure 1).

    Latitude Boot Sequence
    Figure 1: Enable Windows Boot Manager

  2. Go to General > Advanced Boot Options, then select Enable UEFI Network Stack under (Figure 2):

    Latitude Enable UEFI Network Stack
    Figure 2: Enable UEFI Network Stack

  3. Since these newer Latitude laptop models do not have a NIC connection, check to enable Enable USB Boot Support under System Configuration >USB Configuration (Figure 3):

    Latitude Enable USB Boot Support
    Figure 3: Enable USB Boot Support

  4. Check to enable Thunderbolt, Enable Thunderbolt Boot Support, and Enable TBT (and PCIE behind TBT) Pre-boot Modules under System Configuration->Thunderbolt Adapter Configuration (Figure 4), even if you are not connecting to a Thunderbolt dock:

    Latitude Enable Thunberbolt Boot Support
    Figure 4: Enable Thunderbolt boot support

  5. Depending on how your PXE server is configured, it may be necessary to disable Secure Boot Enable under General->Secure Boot->Secure Boot Enable temporarily until after image deployment is complete (Figure 5):

    Latitude Disable Secure Boot
    Figure 5: Disable Secure Boot

  6. Under Post Behavior, Fastboot needs to be set to Thorough (Figure 6):

    Latitude Fastboot Thorough
    Figure 6: Set Fastboot to Thorough

NOTE: Dell Docks that utilize Display-Link drivers (for example, the D6000 series and D3100) will not allow PXE boot. Drivers for these docks do not load in a pre-Windows environment. While Dell does not recommend you PXE boot through a dock connection, you can accomplish this using a USB Type-C to Ethernet dongle (such as Dell SKU# 470-ABND) to complete PXE boot.

Enable PXE boot in BIOS for Latitude 7x20 and 7x30

  1. Select Connection, then ensure Enable UEFI Network Stack is set to Enabled.

    Enable UEFI Network Stack in BIOS
    Figure 7: Enable UEFI Network Stack in BIOS

  2. Select Integrated Devices.
  3. Scroll-down to see USB/Thunderbolt Configuration, then select Enable USB Boot Support.

    Enable USB and Thunderbolt Boot Support
    Figure 8: Enable USB and Thunderbolt Boot Support

  4. Ensure Enable Thunderbolt Boot Support is set to ON.
  5. Click Apply Changes to save changes.

Información adicional

Productos afectados

7000 Series, Latitude 5300 2-in-1, Latitude 5300, Latitude 7300, Latitude 7400 2-in-1, Latitude 7400
Propiedades del artículo
Número del artículo: 000131551
Tipo de artículo: Solution
Última modificación: 16 may 2023
Versión:  5
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.