Interposer Card Only Detects One Solid State Drive (SSD)
Resumen: Some PCIe M.2 Solid State Drives (SSD) fail detection when installed on Multi-SSD interposer cards. This issue has been observed on a Dell Precision Workstation after the interposer card was installed in the system by the system user. ...
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Síntomas
Some PCIe M.2 Solid State Drives (SSD) fail detection when installed on Multi-SSD interposer cards. This issue has been observed on a Dell Precision Workstation after the interposer card was installed in the system by the system user. Only a single SSD drive was detected.
Causa
This issue is caused by which slot the interposer card is installed in. The Precision Tower 5810, 7810, 7910 systems are equipped with multiple PCIe slots that will accept x16 PCIe form factor cards, however some of these PCIe slots are wired as PCIe x4, not PCIe x16.
If the slot is wired as PCIe x4, then only one SSD on the interposer card will be detected.
If the slot is wired as PCIe x4, then only one SSD on the interposer card will be detected.
Resolución
Move the interposer card to a true x16 PCIe slot.
Note: PCIe SSD M.2 Interposer cards installed by Dell from the factory are installed in x16 wired PCIe slot.
Productos afectados
Precision Rack 7910, Precision Tower 5810, Dell Precision Tower 7810, Precision Tower 7910Propiedades del artículo
Número del artículo: 000137329
Tipo de artículo: Solution
Última modificación: 30 sept. 2021
Versión: 4
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.