Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos

Troubleshoot OMSA OpenManage Server Administrator Not Opening or Updating Issues

Resumen: Learn how to troubleshoot Dell OpenManage Server Administrator (OMSA) when it fails to open, update, or display correct information.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.

Síntomas

Article Summary
This document provides information about how to troubleshoot Dell OpenManage Server Administrator (OMSA) if the correct information is not displayed or updated as expected. This may occur if the OMSA services have stopped. 

Note: If the steps in this article do not solve 100% of your issues, see the article below as one of the troubleshooting steps.

If the fault persists, uninstall OMSA and reinstall the latest version of OMSA. Follow instructions in article Support for Dell OpenManage Server Administrator (OMSA)
  • OpenManage Server Administrator - Installation (Windows)
  • OpenManage Server Administrator - Installation (Linux)

Table of Contents

Issue

In the OMSA installed environment, OMSA operation may be unstable. For example, some information such as storage information may not be displayed on the OMSA, or the OMSA may not open. Also, after replacing a disk, the yellow exclamation icon may be displayed on the backplane or predictive failure may not be cleared.

In this case, restarting OMSA services may be valid for troubleshooting. Also, if the OMSA does not open, changing the URL to the hostname (https://127.0.0.1:1xx1) may be valid for troubleshooting.

This article instructs how to restart services.

If the issue is not resolved after restarting OMSA services, contact Dell Technical Support.

Steps for Windows

  1. Press the Windows+R key to open the Run window and enter services.msc.
  2. On the Services screen, check that the following OMSA services are on the list.
    • DSM SA Connection Service
    • DSM SA Data Manager
    • DSM SA Event Manager
    • DSM SA Shared Services
  3. Right-click each service name and select Restart from the displayed menu. There is no specific order to restart.

Steps for Linux

  1. Open the terminal and move to the /opt/dell/srvadmin/sbin.
  2. Run the command ./srvadmin-services.sh restart to restart OMSA services.
Additional Information on OMSA service status is seen by running the command ./srvadmin-services.sh status.

Steps for VMware

Note: To manage Server Administrator Services, you must be logged in as root. This section is applicable to ESX only. For ESXi, you can use the Restart Management Agent on the host to restart Dell OpenManage Services.

To restart Server Administrator on systems, run the command srvadmin-services.sh restart from the command line.

Additional Information
To start Server Administrator on systems, run the command srvadmin-services.sh start from the command line.
To stop Server Administrator, run the command srvadmin-services.sh stop from the command line.

Causa

Not required

Resolución

See above.

Información adicional

See related article Support for Dell OpenManage Server Administrator (OMSA) for more information about opening, restarting, and so forth.

Productos afectados

OpenManage Server Administrator
Propiedades del artículo
Número del artículo: 000134420
Tipo de artículo: Solution
Última modificación: 21 ago. 2024
Versión:  8
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.