Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners

How to Configure SMTP Settings for Dell Data Security Servers

Resumen: Simple Mail Transfer Protocol (SMTP) settings may be configured for Dell Data Security / Dell Data Protection servers by following these instructions.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.
Consulte estos recursos

Síntomas

This article provides the steps for configuring SMTP server information about Dell Security Management Server (formerly Dell Data Protection | Enterprise Edition) and Dell Security Management Server Virtual (formerly Dell Data Protection | Virtual Edition).

Affected Products:

Dell Security Management Server
Dell Data Protection | Enterprise Edition
Dell Security Management Server Virtual
Dell Data Protection | Virtual Edition

Affected Versions:

v8.0.0 and later

Affected Operating Systems:

Windows
Linux

Causa

Not applicable.

Resolución

SMTP configuration is performed manually for Dell Security Management Server or Dell Security Management Server Virtual. Click the appropriate server type for more information.

To input SMTP server information:

  1. Log in to the Dell Security Management Server.
  2. Stop all [PRODUCT] services.
Note:
  1. In Windows Explorer, go to C:\Program Files\Dell\Enterprise Edition\Server Configuration Tool\ and then double-click Credant.Configuration.exe to open the Server Configuration Tool.

Credant Configuration

Note: The directory differs if the Dell Security Management Server has been installed to a custom location.
  1. In the server configuration tool, click the SMTP tab.

SMTP

  1. From the SMTP menu:
    1. Populate an SMTP Host Name.
    2. Populate a User Name for the SMTP server.
    3. Populate the user’s Password.
    4. Populate a From Address on email messages.
    5. Populate an SMTP port.
    6. Select Authentication as True or False.

SMTP menu

Note:
  • The hostname, accounts, port, and settings may differ in your environment.
  • If the environment requires authentication to relay, set authentication to True. If no authentication is required to relay, set authentication to False.
  1. Click Configuration and then select Save.

Save

  1. Click Yes.

Save confirmation

  1. Click Configuration, and then click Exit.

Save

  1. Start all [PRODUCT] services.
Note: For more information about starting services, reference How to Stop and Start Services in Dell Security Management Server / Dell Data Protection Enterprise Edition Server.

The steps to input SMTP server information in Dell Security Management Server Virtual vary between versions. Click the appropriate version for more information. For versioning information, reference How to Identify the Dell Data Security / Dell Data Protection Server Version.

v9.11.0 and Later

To input SMTP server information:

  1. Log in to the Dell Enterprise Server Virtual administration console using the default administrator (delluser) credentials.

Login

Note:
  • The default credentials for Dell Security Management Server Virtual are:
    • Username: delluser
    • Password: delluser
  • An administrator can change the default password within the product’s virtual appliance menu.
  1. On the Main Menu, select Advanced Configuration and then press Enter.

Advanced Configuration

  1. Select E-mail Notifications and then press Enter.

SLN315101_en_US__14ddpkm2073i

  1. From the Setup E-mail Notifications menu:
    1. Check Enable E-mail Alerts.
    2. Populate an SMTP Server hostname.
    3. Populate an SMTP Port.
    4. Populate an SMTP User.
    5. Populate the SMTP user’s Password.
    6. Populate an account to Send Notifications From.
    7. Populate an email to Send Server Status To.
    8. Populate an email to Send Password Changes To.
    9. Populate an email to Send Software Updates To.
    10. Optionally, check Service Alert Reminder and then populate a Reminder Interval (in minutes).
    11. Select the frequency of the Summary Report.
    12. Select OK.
    13. Press Enter.

Setup E-mail Notifications menu

Note:
  • The hostname, accounts, port, and settings may differ in your environment.
  • Multiple email addresses may be separated by semicolon.
v9.1.0 to 9.10.0

To input SMTP server information:

  1. Log in to the Dell Enterprise Server Virtual administration console using the default administrator (ddpuser) credentials.

Login

Note:
  • The default credentials for Dell Security Management Server Virtual are:
    • Username: ddpuser
    • Password: ddpuser
  • An administrator can change the default password within the product’s virtual appliance menu.
  1. On the Main Menu, select Advanced Configuration and then press Enter.

Advanced Configuration

  1. Select Email Notifications and then press Enter.

Email Notifications

  1. From the Setup Email Notifications menu:
    1. Check Enable Email Alerts.
    2. Populate an SMTP Server hostname.
    3. Populate an SMTP port.
    4. Populate an SMTP From User.
    5. Populate an SMTP (Enter) User.
    6. Populate the SMTP user’s Password.
    7. Populate an email to send notification of VE Status to.
    8. Populate an email to send notification of Password changes to.
    9. Populate an email to send notification of software Updates to.
    10. Optionally, check Service Alert Reminder and then populate a Reminder Interval (in minutes).
    11. Select the frequency of the Summary Report.
    12. Select OK.
    13. Press Enter.

Setup Email Notifications menu

Note:
  • The hostname, accounts, port, and settings may differ in your environment.
  • Multiple email messages may be separated by commas or semicolons.
v8.2.0 to 9.0.0

To input SMTP server information:

  1. Log in to the Dell Enterprise Server Virtual administration console using the default administrator (ddpuser) credentials.

Login

Note:
  • The default credentials for Dell Security Management Server Virtual are:
    • Username: ddpuser
    • Password: ddpuser
  • An administrator can change the default password within the product’s virtual appliance menu.
  1. On the Main Menu, select Advanced Configuration and then press Enter.

Advanced Configuration

  1. Select Email Notifications and then press Enter.

Email Notifications

  1. From the Setup Email Notifications menu:
    1. Check Enable Email Alerts.
    2. Populate an SMTP Server hostname.
    3. Populate an SMTP Port.
    4. Populate an SMTP From User.
    5. Populate an SMTP (Enter) User.
    6. Populate the SMTP user’s Password.
    7. Populate an email to send notification of VE Status to.
    8. Populate an email to send notification of Password changes to.
    9. Populate an email to send notification of software Updates to.
    10. Select OK.
    11. Press Enter.

Setup Email Notifications menu

Note:
  • The hostname, accounts, port, and settings may differ in your environment.
  • Multiple email messages may be separated by commas or semicolons.

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

 

Información adicional

 

Videos

 

Productos afectados

Dell Encryption
Propiedades del artículo
Número del artículo: 000125171
Tipo de artículo: Solution
Última modificación: 20 dic. 2022
Versión:  12
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.