OptiPlex 3050 Support for PCIe M.2 SSD Hard Drives
Resumen: This article provides information about the OptiPlex 3050 support for M.2 SSD PCIe hard drives.
Síntomas
The M.2 slot on the OptiPlex 3050 supports only PCIe M.2 SSD hard drives. This article provides additional information about this issue to ensure that the correct M.2 SSD hard drive is installed.
Causa
No cause information
Resolución
The drive must use the PCIe bus instead of SATA when installing an M.2 SSD hard drive in the OptiPlex 3050. The following image (Figure 1) provides a visual reference for the two formats:
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
Figure 1: M.2 SSD hard drives
The table below provides additional information about the slots available on the OptiPlex 3050, and support considerations for each configuration (Figure 2):
Figure 2: OptiPlex 3050 slot configuration
Información adicional
Recommended Articles
Here are some recommended articles related to this topic that might be of interest to you.