Resumen:
How to initiate advanced driver restore in the Dell Command Update tool. Advanced Driver Restore provides a one-click installation of drivers. It allows all drivers to be installed
following Reinstallation of Windows. Also, it can be used for reinstall system drivers to fix driver corruption issues.
...
Seleccione un producto para comprobar la relevancia del artículo
Este artículo se aplica a Este artículo no se aplica a
How to use Advanced Driver Restore in Dell Command Update:
Open up the Dell Command Update application.
If the settings are enabled to allow the Advance Driver Restore (ADR), then there will be a section-called Advance Driver Restore for Windows Reinstallation will be on the main screen (Figure 1 [English Only]).
Figure 1: ADR Main Screen
Click the "click here to download and install a complete driver library."
Note: If it is missing from the menu screen, then follow the section-called Settings to Enable, shown below.
After the installation is complete, the system will need to be restarted.
Settings to Enable:
In Dell Command Update, select Settings by clicking the gear icon in the top-right corner.
Select "Advanced Driver Restore" in the left pane.
Click the slider button "Enable" to ensure that ADR is enabled in the application.
Dell Technical Support recommends "Download driver library from Dell Support Site (Recommended)" (Figure 2 [English only]).
Figure 2: Driver Library
Press OK. The option should now be visible as shown in the top of the article.