Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge: How to backup a Virtual Disk?

Resumen: The virtual disk will be represented by a partition, and this partition can be saved using backup tools.

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.
Consulte estos recursos

Síntomas

 

SLN305745_en_US__1icon Note: This article is part of the Server Tutorials: "Raid and Disks" available here .

Definitions

It is important to define what is a disk group and a virtual disk.
  • Disk Group
    A set of physical disks that are logically grouped and assigned a RAID level. Every disk group provides the overall capacity required to create one or more virtual disks.

     
  • Virtual Disk
    A logical component created to enable hosts to access storage on the storage array. A virtual disk is created from the capacity available on a disk group and appears as one logical component even though it is created from more than one physical disk.

In a PowerEdge Controller (PERC) virtual disk can be created. What are the steps to backup this VD.

Example: 1 Virtual Disk in Raid-5 mode composed by 3 disk of 600GB.
 

 

SLN305745_en_US__1icon Note: The max size of this VD will be 1200GB under the operating system.

 



This is not possible to directly backup at the Virtual Disk level. Backup data means to do a backup at the Operating System level. The virtual disk will be represented by a partition, and this partition can be saved using backup tools.

 
Dell offers many solutions to backup data according to the needs. Backups can be done from file level to bare metal restore level.

In this example, assuming Windows Server is running on the PowerEdge, you can use the Windows Server Backup tool to create an image backup. If there is a need to restore the data, you will be able to restore the full image on the virtual disk.

Causa

-

Resolución

-

Productos afectados

PowerEdge
Propiedades del artículo
Número del artículo: 000143314
Tipo de artículo: Solution
Última modificación: 14 oct. 2021
Versión:  5
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.