These guides will take you step by step through the safe removal of what are considered to be the Customer Replaceable Unit (CRU) parts of a Latitude 5285 system. (CRUs are the parts of the system that shouldn't need an engineer to remove or replace.) The guides will also include pictures to reference what's involved.
If these guides do not cover what you are looking to do, then you will want to reference your System Manual.
The article below provides information on safe practises to take into consideration before working with electrical equipment.
1 | Small Phillip's head screwdriver | 2 | Plastic Scribe |
3 | Small Flat head screwdriver |
Pre-Removal Instructions Before removing the microSD/micro-SIM cover:
During installation or removal of any hardware always ensure all data is backed up properly
Disconnect any telephone, network, or USB cables from the computer
Disconnect the computer and all attached devices from their electrical outlets
Place the tablet carefully on it's screen and slide the microSD/micro-SIM cover to the right. [1]
Lift the cover off the system [2].
Insert the SD card and / or the micro SIM card in the labelled slots [3] and replace the cover.
If you require further assistance, please contact technical Support. | ||
Contact Us |