Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Es posible que algunos números de artículo hayan cambiado. Si esto no es lo que está buscando, intente buscar todos los artículos. Buscar artículos

How Bootable Devices Work in UEFI Boot Mode

Resumen: This article provides information about how bootable devices work in Unified Extensible Firmware Interface (UEFI) mode.

Es posible que este artículo se traduzca automáticamente. Si tiene comentarios sobre su calidad, háganoslo saber mediante el formulario en la parte inferior de esta página.

Contenido del artículo


Síntomas

How bootable devices work in UEFI mode:

In order for BIOS to show a UEFI boot option for a fixed disk, there are only two possibilities:

  • The fixed disk has this file EFI\boot\bootX64.efi stored in the root folder
  • The OS installer has created a boot option on the disk.
Note: This boot option is only built during UEFI OS installation. The OS installer code finds the drive (blockIo device) to install the OS and create a boot option.

If the PERC hard drive image was originally installed in legacy BIOS mode, none of the above are true. There is no boot option for BIOS to list in the UEFI boot menu.


Removable media is treated differently:

BIOS always builds a boot option for removable media regardless of media presence. The virtual media (virtual Floppy and Virtual CD) should show up in the UEFI boot menu as removable device boot options. If they do not show up, then they were disabled.


Causa

Not required

Resolución

See above.

Propiedades del artículo


Producto comprometido

Servers

Fecha de la última publicación

25 jul. 2024

Versión

6

Tipo de artículo

Solution