How to boot to an external device using USB TYPE-C connection

Follow the steps provided in this article to boot to an external device using USB TYPE-C connection for XPS, Precision, and Latitude laptops.

Cannot boot to an external USB-C Connected device.

XPS, Precision, and Latitude users may report that they are unable to boot to externally connected USB Type-C devices.

The computer may report a "Device not identified" error.

The default specification bypasses the USB boot sequence to reduce the boot times in the default configuration. Due to this default configuration, the computer does not boot to the external device.

Enable below two options to support boot from an external device.

1. At boot, Press the F2 key (or alternately press the F12 key then select the option to enter the BIOS setup).
2. In POST Behavior, Select - Fastboot the select the Thorough option (Figure 1):
   
   
   Figure 1: Select the Thorough setting for the Fastboot configuration in the BIOS  
3. In System Configuration -Select USB/Thunderbolt Configuration -Enable Thunderbolt Boot Support (Figure 2):
   
   
   Figure 2: Enable Thunderbolt Boot Support under the USB/Thunderbolt Configuration settings in the BIOS
   Note: You may also need to check to Enable USB Boot Support to recognize the USB boot device.
4. In the General Tab, Advanced Boot Configuration, check Enable Legacy Option ROMs & Enable UEFI Network Stack if not already checked (Figure 3):
   
   Figure 3: Enable UEFI Network Stack under the Advanced Boot Options settings in the BIOS
5. Reboot the computer, the USB Type-C device should now appear in the boot options.

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

• Restructuring of USB and Thunderbolt Settings on New BIOS Version
• How to Implement PXE Booting from USB-C and Thunderbolt Ethernet Adapters