Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos
Es posible que algunos números de artículo hayan cambiado. Si esto no es lo que está buscando, intente buscar todos los artículos. Buscar artículos

Número del artículo: 000207819

Dell Thunderbolt WD22TB4 Docks May Have USB Ports Fail when a Powered Device is Connected

Resumen: Learn about what to do if a Dell Thunderbolt WD22TB4 dock’s USB ports may stop working after connecting a powered device.

Es posible que este artículo se traduzca automáticamente. Si tiene comentarios sobre su calidad, háganoslo saber mediante el formulario en la parte inferior de esta página.

Contenido del artículo

Síntomas

When a powered device (such as a powered speaker) is plugged in to a Dell Thunderbolt WD22TB4, the USB ports may stop working.

Affected Devices:

  • Dell Thunderbolt Dock - WD22TB4

Causa

This is not caused by a Dell hardware failure. Several security software suites can block Thunderbolt 4 (TB4) functionality.

Resolución

Check if releasing the flea power allows powered devices to work. If not, try temporarily disabling the security software. For more information, reference the steps below.

Release Flea Power on the Dell Thunderbolt Dock - WD22TB4

  1. Remove the dock USB Type-C or Thunderbolt cable from the computer.
  2. Unplug AC power from the dock.
  3. Drain any remaining power to the dock by holding the power button for 30 seconds.
  4. Plug AC power into the dock.
  5. The dock LED on the power button should blink three times.
  6. Plug the dock’s USB Type-C or Thunderbolt cable back into the computer.
Note: The USB Type-C connector LED may remain lit despite an error transferring power to the computer.

Temporarily Disable Security Software

Test to find out if an installed security suite software is causing the issue by temporarily disabling your security suite software. If temporarily disabling your security suite software results in the USB ports working again, the security software suite is blocking the dock’s TB4 functionality.

Note: Remember to reenable your security software suite after disabling it for testing.

Some software security suites may allow the dock to be allowlisted. If allowlisting the dock in your software security suite is not an option, contact your software security suite vendor for further troubleshooting options.

Note: The process to disable your security software suite or to allowlist a dock differs depending on your security software suite. For instructions on these subjects and more, contact your software security suite vendor.

Propiedades del artículo

Producto comprometido

Dell Thunderbolt Dock – WD22TB4

Fecha de la última publicación

05 feb 2024

Versión

3

Tipo de artículo

Solution

Volver al principio