Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos

ECS: Geodrive - 파일 시스템 로깅을 활성화하는 방법

Resumen: 파일 시스템 로깅

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.

Instrucciones

Geodrive 캡처 CRUD(Create/Read/Update/Delete) - 사용자 가이드에 설명된 대로 Geodrive에서 수행하는 업로드 및 다운로드 작업. 파일 시스템 로깅을 활성화하여 성능 또는 CRUD 관련 문제를 조사할 수 있습니다.

 

로그 파일은 UTF-8로 텍스트 인코딩됩니다. CSV(쉼표로 구분된 값) 형식이며 Excel을 사용하여 읽을 수 있습니다.
파일 이름의 형식은 다음과 같습니다.

Log_003_2015_06_02_13-43-56-471.csv
Where:

 

003: 클라우드 드라이브 정의
에 할당된 번호2015_06_02_13-43-56-471: UTC 형식의 날짜 및 시간입니다. 마지막 세 자리는 밀리초입니다.

 

세부 정보에
액세스하는 방법이 작업을 수행하는 방법에 대한 자세한 내용은 Geodrive 사용자 가이드를 참조하십시오. 2.2의 예는 다음과 같습니다 https://dl.dell.com/content/docu103422_geodrive-2-2-for-windows-user-guide.pdf
이에 대한 정보는 항상 최신 가이드를 참조하십시오.

 

Información adicional

파일 시스템 로깅

Table 22   Logged operations   

   Operation                         Select the checkbox          Description 
   FileCreate                        Create                       File is created. 
   FolderCreate                      Create                       Folder is created. 
   FileDelete                        Delete and Rename            File is deleted. 
   FolderDelete                      Delete and Rename            Folder is deleted. 
   FileStubDelete                    Delete and Rename            File stub is deleted. 
   FileUpdate                        Data update                  File data is updated. 
   FileAttribUpdate                  Attribute Update             File attribute is updated. 
   FilePermUpdate                    Permission Update            File permissions are updated. 
   FolderRename                      Delete and Rename            Folder is renamed. 
   FileRename                        Delete and Rename            File is renamed. 
   StubRename                        Delete and Rename            File stub is renamed. 
   SectionWrite                      Data update                  File is updated using a section write. 
   Upload                            CIFS-ECS Operations          CIFS-ECS uploads the file to ECS. 
   Restore                           CIFS-ECS Operations          CIFS-ECS restores a file stub from ECS.
File operations  logged.

 

Column                Description
Time                  Time of the operation in UTC. 

Operation             Operation that occurred. See Table 22 above. This will be  FileCreate ,   FolderCreate , etc. 

State                 State of the file at the time of the operation. Values can be: NotUploaded,  Uploaded, UploadedModified, and Stubbed. 

File                  The file path without the cache path root. 

RenameTo              If rename, this is the target path. 

First Open            1 if a process opens a file that is not opened by any other process. It is 0 if it is a subsequent open. 

Directory             0 if file. 1 if directory. 

Process               Process path that caused the operation. 

User                  User account that the process was running under. 

Duration              Duration in seconds that the operation took. This field is only available for the following operations: 
					  Upload, Restore, Stub, FolderSync, FileDeleteGD and  FolderDeleteGD. 

File Size             Size of file, if available. 

Attributes            File attributes. This is displayed as a hex value. Possible file attributes are listed in  File attributes  
					  Multiple attributes are OR ed together. 

Disposition           This shows how the file was opened. Possible values are listed in  File dispositions 

Advanced CIFS-ECS Features

 

Table 23  Log file column information  (page 2 of 2) 

 Status             File open status. This shows what happened as the file was opened. Possible status  
					values are listed in Open status below after file dispostion

 Access             Shows what access was requested in the file open. It contains values such as:  
					FILE_READ_ATTRIBUTES, FILE_READ_DATA, GENERIC_READ,  
					FILE_LIST_DIRECTORY, etc. 

 Exclude            The exclude mask. This indicates if the user has instructed specific operations to  
					be excluded using the Process tab of the Options dialog. Multiple values are  
					OR ed together. Values for this are: 
					0x4   Not Found 
					0x8   Restore 
					0x10   Sync file 
					0x20   Sync path
File attributes
 

 

Possible file attributes and their hex values are: 

#define FILE_ATTRIBUTE_READONLY             0x00000001   
#define FILE_ATTRIBUTE_HIDDEN               0x00000002   
#define FILE_ATTRIBUTE_SYSTEM               0x00000004   
#define FILE_ATTRIBUTE_DIRECTORY            0x00000010   
#define FILE_ATTRIBUTE_ARCHIVE              0x00000020   
#define FILE_ATTRIBUTE_DEVICE               0x00000040   
#define FILE_ATTRIBUTE_NORMAL               0x00000080   
#define FILE_ATTRIBUTE_TEMPORARY            0x00000100   
#define FILE_ATTRIBUTE_SPARSE_FILE          0x00000200   
#define FILE_ATTRIBUTE_REPARSE_POINT        0x00000400   
#define FILE_ATTRIBUTE_COMPRESSED           0x00000800   
#define FILE_ATTRIBUTE_OFFLINE              0x00001000   
#define FILE_ATTRIBUTE_NOT_CONTENT_INDEXED  0x00002000   
#define FILE_ATTRIBUTE_ENCRYPTED            0x00004000   
#define FILE_ATTRIBUTE_INTEGRITY_STREAM     0x00008000   
#define FILE_ATTRIBUTE_VIRTUAL              0x00010000   
#define FILE_ATTRIBUTE_NO_SCRUB_DATA        0x00020000   
#define FILE_ATTRIBUTE_EA                   0x00040000

File dispositions

 

Possible file dispositions and their hex values are: 

#define FILE_SUPERSEDE                  0x00000000 
#define FILE_OPEN                       0x00000001 
#define FILE_CREATE                     0x00000002 
#define FILE_OPEN_IF                    0x00000003 
#define FILE_OVERWRITE                  0x00000004 
#define FILE_OVERWRITE_IF               0x00000005

Open  Status

 

Possible open status values and their hex values are: 

#define FILE_SUPERSEDED                 0x00000000 
#define FILE_OPENED                     0x00000001 
#define FILE_CREATED                    0x00000002 
#define FILE_OVERWRITTEN                0x00000003 
#define FILE_EXISTS                     0x00000004 
#define FILE_DOES_NOT_EXIST             0x00000005 

      Dell EMC CIFS-ECS Tool User Guide

 

Productos afectados

ECS Appliance

Productos

GeoDrive for Windows, ECS Appliance Hardware Gen1 U-Series, ECS Appliance Software without Encryption
Propiedades del artículo
Número del artículo: 000019632
Tipo de artículo: How To
Última modificación: 13 feb 2024
Versión:  4
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.