SC Storage Customer Notification: Dell Storage Manager server setup fails with Error Turning on MPIO
Resumen:With Windows Server 2016, Error Turning on MPIO message is received in Dell Storage Manager.
Seleccione un producto para comprobar la relevancia del artículo
Este artículo se aplica a Este artículo no se aplica aEste artículo no está vinculado a ningún producto específico.No se identifican todas las versiones del producto en este artículo.
In Windows Server 2016, the flag that gets set to indicate whether a feature is enabled or not doesn't get set until after a reboot. In Dell Storage Manager, when running the Server Setup wizard, the below error message will appear because the flag is not set.
Causa
.
Resolución
Workaround:
First install MPIO on systems running Windows Server 2016;
Reboot the server;
Validate MPIO is "Installed" by either:
Running PowerShell command:
get-windowsfeature multipath-io
The "Install State" must show as "Installed".
Checking the Windows Control Panel for MPIO
Use Dell Storage Manager and run the Server Setup wizard.
If you encounter the above error, reboot the server and rerun the wizard.
Resolution: The fix is in the March 2018 update 3B package KB 4088787 (which is a cumulative package). To check for installed updates, use the PowerShell command: