PowerEdge: How to remove or replace a Power Supply Unit (PSU)
Resumen: Step-by-step instructions to remove and replace the Power Supply Unit (PSU).
Este artículo se aplica a
Este artículo no se aplica a
Este artículo no está vinculado a ningún producto específico.
No se identifican todas las versiones del producto en este artículo.
Instrucciones
Replacing a power supply unit is a simple action. If the server has two power supplies configured in redundant mode, which is the default setting, you can remove one without shutting down the server.
The remaining power supply continues to provide the power to the server. In general, all components with an amber removal tool can be unplugged while the server is powered on.
Warning: The system requires at least one power supply for normal operation. On power-redundant systems, remove and replace only one power supply at a time in a system that is powered on.
- Disconnect the power cable from the power source and from the power supply unit that you intend to remove, and then remove the cable from the strap.
- Press the release latch and slide the power supply unit out of the chassis.
| 1. | Release latch |
| 2. | Power supply unit cable connector |
| 3. | Power supply unit |
| 4. | Connector |
| 5. | Power supply unit handle |
To insert the new power supply, insert the block in the slot. This operation can be done while the server is powered on.
Información adicional
Removing a PowerEdge Power Supply Unit
Duration: 00:00:45
When available, closed caption (subtitles) language settings can be chosen using the CC icon on this video player.
Productos afectados
Rack Servers, PowerEdge T360, PowerEdge T440, PowerEdge T550, PowerEdge T560, PowerEdge T640Propiedades del artículo
Número del artículo: 000141313
Tipo de artículo: How To
Última modificación: 23 sept 2024
Versión: 12
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.