Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos

Dell G5 5590, G7 7590, 7790 enables G-key feature with latest BIOS, Alienware Command Center and Alienware OC Controls

Resumen: The latest BIOS, Alienware Command Center and Alienware OC Controls software for the G5 15 5590, G7 15 7590 and G7 17 7790 introduces the G-key feature which allows you to quickly customize the thermal and performance setting of your computer. ...

Este artículo se aplica a Este artículo no se aplica a Este artículo no está vinculado a ningún producto específico. No se identifican todas las versiones del producto en este artículo.

Síntomas

The latest BIOS, Alienware Command Center and Alienware Over Clocking (OC) Controls software for the G5 15 5590, G7 15 7590 and G7 17 7790 introduces the G-key feature which allows you to quickly customize the thermal and performance setting of your computer.

To enable this feature, download and install the latest BIOS, Alienware Command Center and Alienware Over Clocking (OC) Controls for your computer from the Dell Support website.

To download and install the latest BIOS, perform the following steps.

SLN317311_en_US__1icon Note: Please bookmark this article as a restart of your computer is needed to complete each update.
  1. Browse to the Dell Drivers & Downloads page for your computer.
  2. Using the drop down menu under Category, select BIOS.
  3. Touch or click Download to the right of the latest BIOS listed for your computer.
  4. Open File Explorer and browse to the location where the downloaded file is saved
  5. Double-click the BIOS setup file and follow the on-screen instructions to complete the installation process.
  6. Your computer may restart several times to complete the BIOS update process.

To download and install the latest Alienware Command Center, perform the following steps.

  1. Browse to the Dell Drivers & Downloads page for your computer.
  2. Using the drop down menu under Operating system, select the Operating system installed on your computer, when different from the one listed.
  3. Using the drop down menu under Category, select Application.
  4. Touch or click Download to the right of the latest Alienware Command Center listed for your computer.
  5. Open File Explorer and browse to the location where the downloaded file is saved
  6. Double-click the Alienware Command Center file and follow the on-screen instructions to complete the installation process.
  7. Your computer may restart to complete the update process.

To download and install the latest Alienware Over Clocking (OC) Controls, perform the following steps.

  1. Browse to the Dell Drivers & Downloads page for your computer.
  2. Using the drop down menu under Operating system, select the Operating system installed on your computer, when different from the one listed.
  3. Using the drop down menu under Category, select Application.
  4. Touch or click Download to the right of the latest Alienware OC Controls listed for your computer.
  5. Open File Explorer and browse to the location where the downloaded file is saved
  6. Double-click the Alienware OC Controls file and follow the on-screen instructions to complete the installation process.
  7. Your computer may restart to complete the update process.

Productos afectados

Dell G5 15 5590, Dell G7 15 7590, Dell G7 17 7790
Propiedades del artículo
Número del artículo: 000125979
Tipo de artículo: Solution
Última modificación: 20 nov 2020
Versión:  2
Encuentre respuestas a sus preguntas de otros usuarios de Dell
Servicios de soporte
Compruebe si el dispositivo está cubierto por los servicios de soporte.