Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

How to update the Controller Firmware of the PowerVault MD34xx – MD38xx Array

Summary: This tutorial explains how to update the controller your PowerVault MD34xx or MD38xx.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

 

SLN303544_en_US__1icon Note: This article is part of the Dell PowerVault knowledge library, available here

 

This tutorial explains how to update the controller your PowerVault MD34xx or MD38xx.


 

Warning:

 
This update requires a production shutdown to be implemented. As a precautionary measure, it is recommended that you have a complete backup of the present date on the array.
 If the servers connected to this array are under Microsoft Windows operating system, think of updating the MPIO (DSM) drivers.



 

Prerequisites:

 
  • Latest version of MDSS to manage your MD34XX or your MD38XX. The file is in the section "Resource CD"
  • Latest version of the controller firmware. The file is in the section "Storage Controller" and called
    "Dell PowerVault MD 34/38 Series Storage Controller Firmware and NVSRAM firmware"
  • The array is in an optimal state in the management software.
  • Both management ports answer correctly the ping.

 
 

Steps:

 

1. Update procedure

1) Uninstall the MDSM software currently present.
 
2) Install the latest MDSM version on a desktop PC, which can access (ping test) to the management ports of the array.
 
3) Shutdown the production (if the redundancy isn’t validated) by unsettling the LUNs of the servers, or by switching off the servers having access to the LUNs of the array.
 
4) Erase the event log in MDSM
  • Go on the grey bar menu at the top of the screen and click on: Monitor > Reports > Event log, and then click on Clear All.

SLN303544_en_US__2md34x1
Figure 1: Monitor


SLN303544_en_US__3md34x2
Figure 2: Event log


SLN303544_en_US__4md34x3
Figure 3: Clear All



 

2. Updating Controller firmware

On the grey bar menu at the top of the screen, go on: Upgrade-> RAID Controller Module Firmware -> Upgrade
You will have the following warning: Click on OK. 

Select the update file to update the controller firmware ( MD34X0_MD38X0_Series_Firmware_08_xx_xx_xx.dlp )
To update of the NVSRAM, select the MD34xx_MD38xx_NVSRAM_N27XX-xxxxxx-xxx.dlp file.


SLN303544_en_US__5md34x5
 
Note: The process can last up to 30 minutes.

MDSM risks to lose the access to the management of the array: it’s normal; it will find access to the array as soon as the controllers will have finished their start routine.
 

Cause

-

Resolution

-

Affected Products

PowerVault MD3400, PowerVault MD3420, PowerVault MD3460, PowerVault MD3800f, PowerVault MD3800i, PowerVault MD3820f, PowerVault MD3820i, PowerVault MD3860f, PowerVault MD3860i
Article Properties
Article Number: 000123615
Article Type: Solution
Last Modified: 20 Sept 2021
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.