Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Article Number: 000116592

PowerEdge: How Reconfigure a Virtual Disk or Add More Hard Drives.

Summary: This article shows how to add additional disks to a virtual disk or reconfigure a virtual disk.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content

Instructions

The following article provides information about how to expand and how to Reconfigure a virtual disk.

If you have a Virtual Disk (VD) already set-up, you must add additional disks to the disk group to increase the capacity that this guide provides the steps on how to add or Reconfigure the virtual disk group using the RAID BIOS.
 
Note: This article is part of the Server Tutorials: "RAID and Disks," see Dell article PowerEdge Tutorials: Physical Disks and RAID Controller (PERC) on Servers, for more information
 
Caution: Reconfiguring Virtual Disks typically impacts disk performance until the reconfiguration operation is complete. It is highly recommended that the procedure is done during a maintenance window.

Steps:

  1. Access the BIOS by F2 > Device Settings

    expand virtual disk1
    Figure 1: Expand Virtual Disk 1
  2. Select RAID Controller
    Expand Virtual Disk2
    Figure 2: Expand Virtual Disk 2
  3. In the Dashboard view, select Main Menu
    Expand Virtual Disk 3
    Figure 3: Expand Virtual Disk 3
  4. Select Virtual Disk Management
    Expand Virtual Disk 4
    Figure 4: Expand Virtual Disk 4
  5. Select the virtual disk that is changed
    Expand Virtual Disk 5
    Figure 5: Expand Virtual Disk 5
  6. In the drop-down, select Reconfigure Virtual Disks and press GO button
    Expand Virtual Disk 6
    Figure 6: Expand Virtual Disk 6
  7. Select the RAID Level and level and press button Choose the Operation
    Expand Virtual Disk 7
    Figure 7: Expand Virtual Disk 7
  8. Select the disks to be added at VD and press button Apply Changes.
    Expand Virtual Disk 8
    Figure 8: Expand Virtual Disk 8
  9. Confirm the operation and click in YES.
    Expand Virtual Disk 9
    Figure 9: Expand Virtual Disk 9
  10. Press the button Start Operation
    Expand Virtual Disk 10
    Figure 10: Expand Virtual Disk 10
  11. Press button OK to complete the operation.
    Expand Virtual Disk 11
    Figure 11: Expand Virtual Disk 11
  12. To view, see the status of the virtual disk 
    Expand Virtual Disk 12
    Figure 12: Expand Virtual Disk 12
After the reconstruction starts, the system can be left in the raid BIOS until complete, or the system can be rebooted into the operating system.
 
Note: If the system is rebooted into the operating system, the system performance is impacted until the rebuild has been completed.

Additional Information

Related articles and videos:

Article Properties

Affected Product
PowerEdge R330, PowerEdge R340, PowerEdge R430, PowerEdge R440, PowerEdge R530, PowerEdge R530xd, PowerEdge R540, PowerEdge R630, PowerEdge R640, PowerEdge R6515, PowerEdge R720, PowerEdge R730, PowerEdge R730xd, PowerEdge R740, PowerEdge R740XD , PowerEdge R740XD2, PowerEdge R7415, PowerEdge R7425, PowerEdge R7515, PowerEdge R830, PowerEdge R840, PowerEdge R930, PowerEdge R940, PowerEdge R940xa, PowerEdge RAID Controller H840, PowerEdge T30, PowerEdge T340, PowerEdge T430, PowerEdge T440, PowerEdge T640 ...
Last Published Date

12 Jul 2024

Version

8

Article Type

How To

Back to Top