本文介绍如何在 Dell Networking PowerConnect Campus 交换机上实施多生成树协议 (MSTP)
1. 将 STP 操作模式设置为 MSTP。
console(config)#spanning-tree mode mst
2.创建 MST 实例并将其关联到 VLAN
console(config)#spanning-tree mst configuration
console(config-mst)#instance 10 add vlan 10
3.创建区域名称,以便所有希望属于同一区域的网桥可以形成该区域。
console(config)#spanning-tree mst configuration
console(config-mst)#name dell
1.通过配置更高的根桥接优先级,可以将一个交换机在全局上设置为区域根。
console(config)#spanning-tree priority 8192
2.然后,可以将各个交换机设置为特定 MST 实例的优先级。 这提供了更多控制,可以平衡每个 MST 实例的通讯流量。
console(config)#spanning-tree mst 10 priority 4096
建议配置所有边缘端口,将转至打印机、手机、服务器、工作站等最终设备的端口设置为 Portfast。当链路没有等待转发时间延迟就出现时,Portfast 中的端口将直接移至转发状态。
console(config)#interface te1/0/1
console(config-if)#spanning-tree portfast
console# show spanning-tree mst-configuration
console#show spanning-tree mst-configuration
名称:Dell
版本:0
实例 Vlan 已映射
---------- -----------------------------------------------
10 10