Article Number: 000022861
Deployment KB: PowerStore: User Network Firewall Rules Tool - TCP and or UDP Ports
Summary: List of traffic flows required by PowerStore users so they can configure their network firewall in time for deployment.
Article Content
Instructions
Option 1:
Users, Employees, and Partners can download the Tool from Central: https://central.dell.com/solutions/PowerStoreFirewall
Option 2:
Users who have purchased services can work with their Dell Technologies Project Manager and or Solutions Architect.
Users, Employees, and Partners can download the Tool from Central: https://central.dell.com/solutions/PowerStoreFirewall
Option 2:
Users who have purchased services can work with their Dell Technologies Project Manager and or Solutions Architect.
- In the "Rules" tabs, deselect functions not used in your solutions. For example, if your deployment is the PowerStore T model, you can filter out the "PowerStore X Only" rules
- There are rules listed by IP, in case your security policy demands that rules are configured on a /32 basis. Or you can see the pivot tables in "Rules by Subnet" tab if you filter traffic by subnet.
Additional Information
Source Information
| VMware Interactive Site | https://ports.vmware.com/home/vSphere |
| Ports List | Incoming and Outgoing Firewall Ports for ESXi Hosts |
| vSphere Ports Diagram | Network port diagram for vSphere |
| VSAN Ports Summary KB | TCP and UDP ports required to access VMware vSAN (52959) |
| VSAN Ports | vSAN Network Port Requirements |
| SAE Ports | Search Dell Technologies for the most recent "Secure Remote Services Port Requirements" Guide |
| SAE GAS IPs | Only registered Dell Customers can access the content on the following link, using Dell.com/support What IP addresses are used by the EMC Secure Remote Services solution? |
| iDRAC | iDRAC Port Information |
Article Properties
Affected Product
PowerStore
Last Published Date
08 Jun 2023
Version
3
Article Type
How To