The Features of the Dell Compact Form Factor All-in-One Stand CFS25

Reference each section below to learn more about the features of the Dell Compact Form Factor All-in-One Stand CFS25 and how to use it.

Table of Contents:

1. Introduction
2. Features
3. Assembly
4. Range of Movement

Introduction

Figure 1: Dell Compact Form Factor All-in-One Stand CFS25 without the monitor attached

Secure your Dell Precision Compact Workstation and Dell monitor with an all-in-one stand with effortless setup and a cable management system for a clean workspace.

You can locate further information about the Dell Compact Form Factor All-in-One Stand CFS25 from the following link:

• Dell Compact Form Factor All-in-One Stand CFS25 Documentation

You can search the Dell Shop for the Dell Compact Form Factor All-in-One Stand CFS25 to find out information such as the price.

Back to Top

Features

Back to Top

Assembly

Assembly Steps:

1. Use screws to connect the base extender to the AIO Compact Stand - CFS25.

Figure 2: Connecting the base extender

2. With the AIO Compact Stand - CFS25 standing on a desk, connect it to the AIO Compact Stand - CFS25 stand arm from under the stand.

Figure 3: Connecting the stand arm

3. Screw and tighten the mounting bolts into the base of the compact computer.

Figure 4: Tightening mounting bolts into the compact computer

4. Position the mounting bolts into the computer plate on the AIO Compact Stand - CFS25. Secure the compact computer to the stand.

Figure 5: Securing the compact computer to the stand

5. Route the compact computer and monitor cables through the slot in the stand and into the computer. Leave the monitor cables free until the monitor has been fitted.

Figure 6: Routing cables

6. Slide the cable cover over the cables connected into the computer.

Figure 7: Sliding the cable cover over cables

7. Lock the slide latch under the front of the compact computer.

Figure 8: Locking the slide latch

8. Optionally, using a lock (not included) and the hasp on the stand, you can lock the compact computer in place.

Figure 9: Security lock

9. Connect the monitor onto the monitor arm of the stand.

Figure 10: Connecting the monitor onto the monitor arm

10. Use the hooks on the back of the cable cover to take up any slack in the monitor cabling.

Figure 11: Using the cable hooks

11. Plug in the monitor cables.

Figure 12: Connecting monitor cables

Back to Top

Range of Movement

Do not attempt to swivel the monitor from portrait mode to landscape mode with a 27" monitor.

Figure 13: Do not swivel from portrait to landscape with a 27" monitor

The top of the monitor arm has a monitor quick release mechanism.

Figure 14: Monitor quick release mechanism

Back to Top