升级 7.0 或 8.0 VxRail 群集时出现以下错误。
VxRail Update ran into a problem...
Please refer to KB000062924 article
Failed to upload bundle: VXRAIL_COMPOSITE-7.0.482-28355940_for_7.0.x.zip: Error while unzipping the compostie bundle files. Used file:
/data/store2/lcm/VXRAIL_COMPOSITE-7.0.482-28355940_for_7.0.x.zip. See the KB000062924 article.
Error extracting upgrade bundle 7.0.482-28355940. Failed to upload bundle/ Please refer to log for more details.
在此事件发生之前和之后,我们会在 VxRail Manager 虚拟机 (VM) 上看到有关“虚拟机 CPU 使用率”的定期警报。
通过 SSH 连接到 VxRail Manager 并运行 top 命令。
top
top - 21:25:12 up 16 min, 1 user, load average: 280.35, 175.40, 79.56
Tasks: 465 total, 83 running, 377 sleeping, 0 stopped, 5 zombie
%Cpu(s): 0.6 us, 96.1 sy, 0.0 ni, 0.0 id, 0.1 wa, 0.0 hi, 3.2 si, 0.0 st
%CPU 注意事项:前两项是
us 和
sy。
us 表示 用户 CPU 时间。
sy 表示系统 CPU 时间。
在这种情况下,我们看到sy继续跃升至90%以上,
而美国保持在20%以下。
要解决此问题,请更改虚拟机配置:
有两个选项可用于关闭 VxRail Manager。
1. 从 SSH 会话:
shutdown -P
2. 在 vSphere Client 中,右键单击 VxRail Manager 虚拟机
,然后单击电源,然后单击
关闭来宾操作系统。
- 虚拟机关闭后,单击VM Hardware部分中的EDIT。
- 在 Hardware Settings 屏幕中,将 CPU 更改为 6,将内存更改为 16 GB。