Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Connectrix Cisco MDS-9700:如何將電源供應器備援模式變更為電網備援

Summary: 本文說明在 MDS 9700 系列交換器上將電源供應器備援模式變更為電網備援的相關步驟。

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Instructions

MDS 9700 系列交換器支援的電源供應器模式為:
  • 組合模式 - 此模式會使用所有電源供應器的組合容量。如果電源發生故障,整個交換機可能會關閉(取決於使用的功率),從而導致流量中斷。此模式很少使用,除非在交換器需要更多電源的情況下。
  • 輸入源(網格)冗餘模式 - 此模式將一半的電源分配給可用類別,另一半分配給備用類別。您必須針對可用和保留類別使用不同的電源供應器,以便在用於使用中電源的電源供應器故障時,用於保留電力的電源供應器也能為交換器供電。如果電網備援模式遺失,電源模式會恢復為組合模式。
  • 電源供應器 (N+1) 備援模式 - 此模式會分配一個電源供應器作為保留,以在使用中的電源供應器故障時為交換器供電。其餘電源供應器會分配給可用類別。備用電源的功率必須至少與用於作用中電源的每個電源一樣強大。
  • 完整備援模式 - 此模式結合了輸入源 (電網) 和電源供應器 (N+1) 備援模式。與輸入源冗餘模式類似,此模式將一半的電源分配給可用類別,將其餘電源分配給備用類別。如果用於作用中電源的電源發生故障,也可以使用其中一個備用電源來供電。
在電源模式之間切換不會中斷,而且只有在目標模式中有足夠的可用功率時才有可能。如果沒有足夠的電源,MDS NX-OS 會拒絕命令,並顯示「容量不足」訊息。
  1. 檢查 show running-config功能電源冗餘模式為 ps-redundant
  2. 使用以下命令變更為 輸入來源 (grid) 備援模式
Syntax: # power redundancy-mode {combined | insrc-redundant | ps-redundant |redundant }
  1. 進入交換器組態模式:
switch(config)# power redundancy-mode insrc-redundant
switch(config)# 2024 Jan 13 12:40:22 mds9706 %PLATFORM-4-PFM_PS_RED_MODE_CHG: Power redundancy mode changed to insrc-     redundant
  1. 使用以下命令驗證變更:
switch(config)# show environment power
範例: 
switch(config)# show environment power 
Voltage: 50 Volts
Power                              Actual        Total
Supply    Model                    Output     Capacity    Status
                                 (Watts )     (Watts )
-------  -------------------  -----------  -----------  --------------
1        DS-CAC97-3KW               333 W       3000 W     Ok        
2        DS-CAC97-3KW               345 W       3000 W     Ok        
3        DS-CAC97-3KW               345 W       3000 W     Ok        
4        DS-CAC97-3KW               337 W       3000 W     Ok        
                                  Actual        Power      
Module    Model                     Draw    Allocated    Status
                                 (Watts )     (Watts )     
-------  -------------------  -----------  -----------  --------------
1        DS-X9848-480K9             354 W        500 W    Powered-Up
3        DS-X97-SF1-K9              107 W        190 W    Powered-Up
4        DS-X97-SF1-K9              105 W        190 W    Powered-Up
6        DS-X9448-768K9             403 W        650 W    Powered-Up
Xb1      DS-X9706-FAB1               48 W         85 W    Powered-Up
Xb2      DS-X9706-FAB1               47 W         85 W    Powered-Up
Xb3      DS-X9706-FAB1               48 W         85 W    Powered-Up
Xb4      DS-X9706-FAB1               48 W         85 W    Powered-Up
Xb5      DS-X9706-FAB1               48 W         85 W    Powered-Up
Xb6      DS-X9706-FAB1               48 W         85 W    Powered-Up
fan1     DS-C9706-FAN                29 W        300 W    Powered-Up
fan2     DS-C9706-FAN                29 W        300 W    Powered-Up
fan3     DS-C9706-FAN                33 W        300 W    Powered-Up
N/A - Per module power not available
Power Usage Summary:
--------------------
Power Supply redundancy mode (configured)                InSrc-Redundant
Power Supply redundancy mode (operational)               InSrc-Redundant
Total Power Capacity (based on configured mode)               6000 W
Total Power of all Inputs (cumulative)                       12000 W
Total Power Output (actual draw)                              1360 W
Total Power Allocated (budget)                                3090 W
Total Power Available for additional modules                  2910 W

Article Properties


Affected Product

Connectrix MDS-9710

Last Published Date

29 Apr 2024

Version

2

Article Type

How To