NetWorker의 vCenter 인벤토리 프로세스(nsrvim)는 서비스 시작 중에 시작된 후 15분마다(기본값) 실행됩니다. 또한 이 프로세스는 vCenter에 대해 VMware 보호 작업이 실행될 때마다 실행됩니다. vCenter에 연결된 NetWorker Server 수와 VMware 보호 정책 작업의 양 또는 빈도에 따라 달라집니다. 이로 인해 짧은 기간 내에 vCenter Server에 대한 여러 인벤토리 쿼리 요청이 발생합니다.
이 작업은 NetWorker Server의 daemon.log에서 다음과 같이 표시됩니다.
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: nsrvim starting on NSR_HOSTNAME (process 10852).
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: Connecting to NetWorker on 'NSR_HOSTNAME'.
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: Querying NSR hypervisor resource 'VC_HOSTNAME'
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: Connecting to service at https://VC_HOSTNAME/sdk
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: Starting session with infrastructure services daemon.
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: Querying for inventory at https://VC_HOSTNAME/sdk
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: Querying for categories from infrastructure services daemon.
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: Updating NSR hypervisor resource 'VC_HOSTNAME'
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: Finished updating NSR hypervisor resource 'VC_HOSTNAME'
106637 MM/DD/YYY HH:MM:SS AM/PM 1 3 0 15204 8080 0 NSR_HOSTNAME nsrdisp_nwbg RAP notice job 'nsrvim' progress message: nsrvim exiting on NSR_HOSTNAME (process 10852).
VMware 보호 정책이 실행될 때도 동일한 메시지가 나타납니다.
NetWorker 19.10에는 NetWorker 백업 관리자가 nsrvim 빈도를 조정할 수 있는 새로운 기능이 도입되었습니다. 이 기능은 NetWorker Server의 새 환경 변수를 사용하여 도입되었습니다. 이 환경 변수를 사용하려면 다음을 수행합니다.
1. NetWorker Server를 19.10.0.0(또는 그 이상)으로 업그레이드합니다. https://www.dell.com/support/home/product-support/product/networker/drivers
sudo vi /nsr/nsrrc
2. 파일에 다음 줄을 추가합니다.
NSRVIM_TIME_INTERVAL=60
export NSRVIM_TIME_INTERVAL
3. NetWorker Server 서비스를 재시작합니다.
sudo systemctl restart networker
1. 제어판을 열고 시스템 및 보안,시스템을 차례로 클릭합니다 .
2. Advanced System Settings를 클릭합니다.
3. 시스템 속성 에서 환경 변수를 클릭합니다.
4. 시스템 변수에서 c는 새로 만들기를 클릭합니다.
5. 변수 이름 필드에 다음을 입력합니다.
NSRVIM_TIME_INTERVAL6. 변수 값 필드에 15에서 60 사이의 숫자를 입력합니다(이 숫자는 분에 해당).