How to Save and Restore Library configuration and Restore Factory Defaults on a TL2000 or TL4000
Summary: Here you can find the description how to Save and/or Restore the Library configuration and the Restore Factory Defaults on a TL2000 or TL4000.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
To
Save the Library Configuration.
Go to Save/Restore under the Configure Library section.
Click Save at the Save Configuration to File.
The Download is provided using the Browser.
The *.dbb File is located in your Downloads folder from your management system.
To
Restore the Library Configuration.
Go to Save/Restore under the Configure Library section.
Click Browse… at the Restore Configuration from File.
Select the configuration file (*.dbb) from your management system.
Click Restore at the Restore Configuration from File.
Be aware: If you load a configuration from another Library, the ServiceTag is overwritten too, and it should be corrected afterwards. A description how to do that you can find here: How to change the ServiceTag of a PowerVault TL2000 or TL4000.
To
Restore Factory Defaults
Go to Save/Restore under the Configure Library section.
Click Restore at the Restore Factory Defaults.
Confirm the prompt on the screen with OK.
Save the Library Configuration.
Go to Save/Restore under the Configure Library section.
Click Save at the Save Configuration to File.
The Download is provided using the Browser.
The *.dbb File is located in your Downloads folder from your management system.
To
Restore the Library Configuration.
Go to Save/Restore under the Configure Library section.
Click Browse… at the Restore Configuration from File.
Select the configuration file (*.dbb) from your management system.
Click Restore at the Restore Configuration from File.
Be aware: If you load a configuration from another Library, the ServiceTag is overwritten too, and it should be corrected afterwards. A description how to do that you can find here: How to change the ServiceTag of a PowerVault TL2000 or TL4000.
To
Restore Factory Defaults
Go to Save/Restore under the Configure Library section.
Click Restore at the Restore Factory Defaults.
Confirm the prompt on the screen with OK.
Affected Products
PowerVault TL2000, PowerVault TL4000Article Properties
Article Number: 000205962
Article Type: How To
Last Modified: 27 Mar 2023
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.