Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

Article Number: 000187330

OptiPlex 7490 All in One (AIO) Teardown removal guide for customer replaceable unit (CRUs)

Summary: This article is a guide to those parts of the Dell OptiPlex 7490 All in One Desktop system that Dell considers anyone can remove and replace.

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content

Instructions

These guides take you step-by-step through the safe removal of the Customer Replaceable Unit (CRU) parts of a OptiPlex 7490 AIO desktop system. (CRUs are the parts of the system that should not need an engineer to remove or replace.) The guides include pictures to reference what is involved.

Table of Contents:

  1. CRU Removal Guide
  2. Removal Instructions

 

Removal Guide

 

If these guides do not cover what you are looking to do, then you will want to reference your System Manual.

The article below provides information about safe practices to consider before working with electrical equipment.


Back to Top

 

Removal Instructions

 

Note: Click the title of the section you want to open below, in order to see the contents.
 
|

 

Req_Tools

1 Small Phillip's head screwdriver 2 Plastic Scribe
3 Small Flat head screwdriver    
 
Note: Be aware that using a large Phillips or Flat Head screwdriver may result in damage to the head of the screws. This would make their removal impossible without specialty tools, that are not available to our onsite engineers.

 

  1. Pre-Removal Instructions Before removing the Stand:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

  2. To remove the Stand with the system lying on it is screen. Press up the catch at the bottom of the back plate on the Stand.

Opti7490_CRU_Stand

  1. Pull the plate towards the bottom of the system and lift it up and away from the back of the PC.

 

  1. Pre-Removal Instructions Before removing the Cable Cover (Optional):

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand.

  2. Unroute the cables from the cable cover that sits over the rear connector panel.

Opti7490_CRU_Cable Cover

  1. Remove the single screw that secures the cover to the system.

Opti7490_CRU_Cable Cover2

  1. Lift the cable cover off the system.

 

  1. Pre-Removal Instructions Before removing the Back Cover:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand and the Cable Cover.

  2. With the system still on its screen. Locate the release tab that was under the back plate of the Stand. Press the tab in.

Opti7490_CRU_Back Cover

  1. Slide the cover towards the top of the system until it unseats from the securing lugs and lift it off the system.

Opti7490_CRU_Back Cover2

 

  1. Pre-Removal Instructions Before removing the System Board Shield:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand and the Back Cover.

  2. With the system on its screen, the shield covers the center of the system. Remove the five (5) screws that secure the shield to the system.

Opti7490_CRU_Shield

  1. Lift the shield up towards the top of the system and away from the Motherboard.

 

  1. Pre-Removal Instructions Before removing the Memory Cards:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand and the Back Cover.

  2. With the system on its screen, pry up on the Memory door on the right-hand side of the System Board Shield.

Opti7490_CRU_Memory

  1. Pull the retention clips on either side of the Memory away from each other until the Memory pops up at an angle. Lift it out of the system.

Note: Repeat steps 2 and 3 for any additional memory that is installed in the system.

 

  1. Pre-Removal Instructions Before removing the Hard Disk Drive (HDD):

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand and the Back Cover.

  2. Press down the tab securing the hard-drive assembly to the system-board shield. Slide and lift the hard-drive assembly from the slot on the display-assembly base.

Opti7490_CRU_HDD
Opti7490_CRU_HDD2

  1. Pry the tabs on hard-drive bracket from its slots on the hard drive. Remove the hard drive from the hard-drive bracket.

 

  1. Pre-Removal Instructions Before removing the Solid State Drive (SSD) or Intel Optane Card:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand, Back Cover, System Board Shield.

M.2 2230 SSD/Optane Memory Module

  1. Locate the M.2 connector below the memory, under the system shield. Remove the single screw that secures the card to the chassis.

Opti7490_CRU_SSD

  1. The card pops up at an angle. Pull the card carefully out of the connector and system.

M.2 2280 SSD/Optane Memory Module

  1. Locate the M.2 connector above the memory, under the system shield. Remove the single screw that secures the card to the chassis.

Opti7490_CRU_SSD2

  1. The card pops up at an angle. Pull the card carefully out of the connector and system.

 

  1. Pre-Removal Instructions Before removing the System Fan:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand, Back Cover, System Board Shield.

  2. The fan is located above the HDD. Disconnect the system fan cable from the socket on the motherboard. Remove the three (3) screws securing the fan to the system.

Opti7490_CRU_Fan

  1. Lift the fan up and out of the system.

 

  1. Pre-Removal Instructions Before removing the Coin Cell Battery:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand, Back Cover, System Board Shield.

  2. Locate the Battery under the system shield. Press the tab at the back of the coin cell Battery socket until the Battery pops up.

Opti7490_CRU_Battery

  1. Lift the Battery up and out of the socket.

 

  1. Pre-Removal Instructions Before removing the WLAN Card:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand, Back Cover, System Board Shield.

  2. Remove the two screws securing the WLAN shield covering the WLAN card in the bottom-left corner, under the Shield. Unroute the antenna cabling from the shield and remove the shield.

Opti7490_CRU_WLAN

  1. Remove the single screw securing the antenna cover and the card to the chassis.

  2. Remove the antenna connector shield. Disconnect the antenna cables from the WLAN card. (Pop stud connectors.)

Opti7490_CRU_WLAN2

  1. Pull the WLAN card out of the slot and away from the system.

 

  1. Pre-Removal Instructions Before removing the Camera Assembly:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand, Back Cover, System Board Shield.

  2. Remove the two (2) screws marked CAM that secures the assembly door to the chassis.

Opti7490_CRU_Camera

  1. Remove the two (2) screws that secure the assembly to the chassis.

  2. Disconnect the assembly cable from the motherboard and unroute the cable.

Opti7490_CRU_Camera2

  1. Slide the assembly out of the system and away from the chassis.

 

  1. Pre-Removal Instructions Before removing the Base Cover:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand, Back Cover, System Board Shield.

  2. Remove the four (4) screws that secure the base cover to the chassis. Gently pry up the tabs running across the top edge of the base cover.

Opti7490_CRU_Base Cover

  1. Lift the bottom cover up and off the chassis.

Opti7490_CRU_Base Cover2

 

  1. Pre-Removal Instructions Before removing the Power Supply (PSU):

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand, Back Cover, Base Cover, System Board Shield.

  2. Remove the single screw securing the PSU socket to the I/O bracket. Slide the socket towards the bottom of the system to remove it from the system.

Opti7490_CRU_PSU

  1. Unroute the psu cables from the routing clips on the system and PSU fan and disconnect the power cable from the motherboard.

  2. Remove the single screw that secures the PSU to left-hand side of the system.

Opti7490_CRU_PSU2

  1. Slide the psu towards the top of the system and lift it up and out of the system.

 

  1. Pre-Removal Instructions Before removing the Power Supply Fan:

    1. During installation or removals of any hardware always ensure that all data is backed up properly.

    2. Disconnect any telephone, network, or USB cables from the computer.

    3. Disconnect the computer and all attached devices from their electrical outlets.

    4. Remove the Stand, Back Cover, Base Cover, System Board Shield.

  2. Unroute the PSU power cables from the routing clips on the PSU fan.

  3. Disconnect and unroute the PSU fan cable from the motherboard.

Opti7490_CRU_PSU Fan

  1. Remove the two (2) screws that secure the fan to the system. Lift the PSU fan up and out of left-hand side of the system.

 

If you require further assistance, contact Technical Support.

 

  Contact Us  

Article Properties

Affected Product

OptiPlex 7490 All-In-One

Last Published Date

22 Dec 2023

Version

2

Article Type

How To

Back to Top