ECS: Ferramenta de certificação SSL de dados e gerenciamento

Summary: A ferramenta de certificado do ECS pode ajudá-lo a fazer upload de certificados SSL para as interfaces de gerenciamento e dados do ECS.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Check out other resources

Instructions

Instalação
Configuração
Visualizando seus certificados atuais
Criando uma solicitação de assinatura de certificado
Criando um certificado autoassinado
Fazendo upload de seu certificado

Instalação

Faça download da versão mais recente da ferramenta anexada neste artigo da base de conhecimento
Carregue a ferramenta em /home/admin em um dos nós do ECS.
Altere para o diretório /home/admin e extraia o pacote.

# cd /home/admin
# tar -zxvf ecs_certificate_tool-1.5.tgz

Altere para o diretório da ferramenta do certificado.

# cd ecs_certificate_tool-1.5

Configure as credenciais da interface do usuário root para a ferramenta a ser usada.

Comando:

# python ecs_certificate_tool.py configure_credentials

Exemplo:

admin@:~/ecs_certificate_tool-release-1.4> python ecs_certificate_tool.py configure_credentials
ecs_certificate_tool v1.4

=======> Configuring Credentials

Please enter the password for the root management user:
Authenticating using configured credentials..PASS

Successfully configured credentials!

Use a ferramenta de certificado para gerar a configuração do nome alternativo da entidade (SAN). Você deve adicionar manualmente o FQDN e o endereço IP do balanceador de carga se estiver usando um.

Comando:

python ecs_certificate_tool.py generate_san

Exemplo:

generate_san
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

======================================================================
Generating SAN (subject alternative name) config.
======================================================================

----------------------------------------------------------------------
Setting DATA_SUBJECT_ALTERNATIVE_NAME config
----------------------------------------------------------------------
Set DNS_NAMES to :
['layton-ex3000.example.com',
 'ogden-ex3000.example.com',
 'orem-ex3000.example.com',
 'provo-ex3000.example.com',
 'sandy-ex3000.example.com']

Set IP_ADDRESSES to :
['192.0.2.104',
 '192.0.2.105',
 '192.0.2.106',
 '192.0.2.107',
 '192.0.2.108']

----------------------------------------------------------------------
Setting MANAGEMENT_SUBJECT_ALTERNATIVE_NAME config
----------------------------------------------------------------------
Set DNS_NAMES to :
['layton-ex3000.example.com',
 'ogden-ex3000.example.com',
 'orem-ex3000.example.com',
 'provo-ex3000.example.com',
 'sandy-ex3000.example.com']

Set IP_ADDRESSES to :
['192.0.2.104',
 '192.0.2.105',
 '192.0.2.106',
 '192.0.2.107',
 '192.0.2.108']

Wrote changes to: /home/admin/ecs_certificate_tool-1.0/config.ini
DONE

Configuração

É no arquivo config.ini que você define todos os valores de seu certificado.
Se você não quiser usar um valor, deixe-o em branco como no exemplo abaixo:

# optional unit name
ORGANIZATIONAL_UNIT_NAME =

Este é um exemplo de como é o config.ini padrão:

[GENERAL]
COMMON_NAME = *.ecs.example.com
# Two letter country name
COUNTRY_NAME = US
LOCALITY_NAME = Salt Lake City
STATE_OR_PROVINCE_NAME = Utah
STREET_ADDRESS = 123 Example Street
ORGANIZATION_NAME = Example Inc.
# optional unit name
ORGANIZATIONAL_UNIT_NAME =
# optional email address
EMAIL_ADDRESS = example@example.com

[UI_CREDENTIALS]
USERNAME = root
PASSWORD = ChangeMe

[SELF_SIGNED]
# 1825 days = 5 years
VALID_DAYS = 1825

[DATA_SUBJECT_ALTERNATIVE_NAME]
DNS_NAMES = node1.ecs.example.com node2.ecs.example.com node3.ecs.example.com
IP_ADDRESSES = 192.0.2.1 192.0.2.2 192.0.2.3 192.0.2.4

[MANAGEMENT_SUBJECT_ALTERNATIVE_NAME]
DNS_NAMES = node1.ecs.example.com node2.ecs.example.com node3.ecs.example.com
IP_ADDRESSES = 198.51.100.1 198.51.100.2 198.51.100.3 198.51.100.4

[ADVANCED]
# Probably dont use these unless you really know what your doing
SERIAL_NUMBER =
SURNAME =
GIVEN_NAME =
TITLE =
GENERATION_QUALIFIER =
X500_UNIQUE_IDENTIFIER =
DN_QUALIFIER =
PSEUDONYM =
USER_ID =
DOMAIN_COMPONENT =
JURISDICTION_COUNTRY_NAME =
JURISDICTION_LOCALITY_NAME =
BUSINESS_CATEGORY =
POSTAL_ADDRESS =
POSTAL_CODE =
INN =
OGRN =
SNILS =
UNSTRUCTURED_NAME =

Visualizando os certificados atuais

Execute a operação ecs_certificate_tool view_certs.

Comando:

# python ecs_certificate_tool.py  view_certs

Exemplo:

ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

Authenticating using configured credentials..PASS

----------------------------------------------------------------------
View certificates
----------------------------------------------------------------------

======================================================================
Data Certificate:
======================================================================

Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            3b:0f:a3:e2:fa:0a:90:14:86:6c:a3:3a:26:5c:0b:8d:6e:18:7d:eb
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Validity
            Not Before: Oct 17 18:35:06 2020 GMT
            Not After : Oct 16 18:35:06 2025 GMT
        Subject: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:ad:13:ea:31:bb:13:30:fc:ad:75:1a:84:16:53:
                    76:9d:0d:96:60:69:04:70:ad:00:76:c5:e4:f0:39:
                    3d:e3:9b:2e:2a:06:0b:ae:29:16:22:69:73:1d:2b:
                    27:73:68:7a:42:62:84:37:9b:7e:7f:60:48:aa:80:
                    14:96:07:52:ac:d5:dd:1f:af:59:3b:88:5e:15:43:
                    f1:9e:29:91:0a:6d:19:8e:41:4b:3c:9f:0c:64:16:
                    5c:c6:61:a6:c7:28:a9:9e:14:81:10:7e:4a:4f:25:
                    93:20:d9:5b:fe:b3:ac:56:28:f0:89:2c:e3:97:18:
                    df:1d:e3:1b:6d:c5:08:fb:d6:97:81:82:b1:6b:33:
                    45:1d:de:7a:30:5c:6d:4a:70:96:06:f8:05:48:a7:
                    89:ad:ce:db:99:f2:61:88:92:75:e5:cf:d2:b1:2c:
                    28:60:6f:5e:ba:6c:02:f4:12:90:be:eb:6d:48:ae:
                    b2:3a:6e:76:a6:02:b1:9e:f7:95:2c:65:8a:80:1a:
                    64:52:ec:f5:0c:2b:c8:87:a7:e5:4d:f7:34:60:a5:
                    49:03:30:27:10:8d:ad:4e:92:52:8b:d9:6b:ad:2d:
                    15:60:a5:26:fc:1b:1d:69:9f:5c:a3:0f:d9:cb:b9:
                    1d:68:30:6c:c8:ca:e1:71:4b:88:bd:98:d7:10:ae:
                    89:c5
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Subject Alternative Name:
                DNS:node1.ecs.example.com, DNS:node2.ecs.example.com, DNS:node3.ecs.example.com, IP Address:192.0.2.1, IP Address:192.0.2.2, IP Address:192.0.2.3, IP Address:192.0.2.4
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Key Usage: critical
                Digital Signature, Non Repudiation, Key Encipherment
            X509v3 Extended Key Usage: critical
                TLS Web Server Authentication
            X509v3 Authority Key Identifier:
                0.
    Signature Algorithm: sha256WithRSAEncryption
         33:85:7e:3b:fd:fd:3a:35:97:17:11:2d:4d:e1:7e:03:35:82:
         8a:47:30:ed:b2:f9:1b:b4:22:a2:60:00:b5:9c:aa:6c:0d:e7:
         ea:c7:0a:e6:05:24:7d:bd:50:ab:23:9b:16:6a:e7:be:e9:21:
         26:61:0e:e5:e1:62:7e:d8:01:3a:3e:19:14:89:c2:ef:62:a0:
         17:5c:80:2b:24:6b:96:73:fa:b0:8f:4d:09:0e:69:4f:72:f0:
         4d:b1:13:8d:90:4e:18:4b:82:be:fd:48:b0:c2:9d:9c:43:d9:
         d9:73:e6:15:88:79:1f:3e:13:ec:c9:6f:5f:2a:08:7c:a7:5d:
         b4:e1:50:0f:3c:49:e3:e4:9f:8f:dd:e0:b5:b5:2d:d8:2d:29:
         94:2d:4b:66:20:36:f0:ae:3a:ae:a4:c5:91:3c:f4:2a:d6:f5:
         24:ec:7b:3a:96:d6:75:91:f9:b3:1c:8a:93:87:1b:d7:f2:f7:
         72:4d:0c:02:b9:2e:ab:f6:76:ca:c5:74:39:e0:a0:54:2b:85:
         4d:dd:e6:c7:fc:d0:e7:bc:3e:9e:98:19:e5:ed:ad:5f:4b:ea:
         20:17:c5:23:eb:09:ad:8e:13:57:75:78:f9:68:bb:18:34:fc:
         3a:26:94:90:5e:ed:a6:09:bb:14:5c:bd:2e:d3:5b:c4:43:08:
         66:95:e7:ee


======================================================================
Management Certificate:
======================================================================

Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            3b:0f:a3:e2:fa:0a:90:14:86:6c:a3:3a:26:5c:0b:8d:6e:18:7d:eb
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Validity
            Not Before: Oct 17 18:35:06 2020 GMT
            Not After : Oct 16 18:35:06 2025 GMT
        Subject: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:ad:13:ea:31:bb:13:30:fc:ad:75:1a:84:16:53:
                    76:9d:0d:96:60:69:04:70:ad:00:76:c5:e4:f0:39:
                    3d:e3:9b:2e:2a:06:0b:ae:29:16:22:69:73:1d:2b:
                    27:73:68:7a:42:62:84:37:9b:7e:7f:60:48:aa:80:
                    14:96:07:52:ac:d5:dd:1f:af:59:3b:88:5e:15:43:
                    f1:9e:29:91:0a:6d:19:8e:41:4b:3c:9f:0c:64:16:
                    5c:c6:61:a6:c7:28:a9:9e:14:81:10:7e:4a:4f:25:
                    93:20:d9:5b:fe:b3:ac:56:28:f0:89:2c:e3:97:18:
                    df:1d:e3:1b:6d:c5:08:fb:d6:97:81:82:b1:6b:33:
                    45:1d:de:7a:30:5c:6d:4a:70:96:06:f8:05:48:a7:
                    89:ad:ce:db:99:f2:61:88:92:75:e5:cf:d2:b1:2c:
                    28:60:6f:5e:ba:6c:02:f4:12:90:be:eb:6d:48:ae:
                    b2:3a:6e:76:a6:02:b1:9e:f7:95:2c:65:8a:80:1a:
                    64:52:ec:f5:0c:2b:c8:87:a7:e5:4d:f7:34:60:a5:
                    49:03:30:27:10:8d:ad:4e:92:52:8b:d9:6b:ad:2d:
                    15:60:a5:26:fc:1b:1d:69:9f:5c:a3:0f:d9:cb:b9:
                    1d:68:30:6c:c8:ca:e1:71:4b:88:bd:98:d7:10:ae:
                    89:c5
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Subject Alternative Name:
                DNS:node1.ecs.example.com, DNS:node2.ecs.example.com, DNS:node3.ecs.example.com, IP Address:192.0.2.1, IP Address:192.0.2.2, IP Address:192.0.2.3, IP Address:192.0.2.4
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Key Usage: critical
                Digital Signature, Non Repudiation, Key Encipherment
            X509v3 Extended Key Usage: critical
                TLS Web Server Authentication
            X509v3 Authority Key Identifier:
                0.
    Signature Algorithm: sha256WithRSAEncryption
         33:85:7e:3b:fd:fd:3a:35:97:17:11:2d:4d:e1:7e:03:35:82:
         8a:47:30:ed:b2:f9:1b:b4:22:a2:60:00:b5:9c:aa:6c:0d:e7:
         ea:c7:0a:e6:05:24:7d:bd:50:ab:23:9b:16:6a:e7:be:e9:21:
         26:61:0e:e5:e1:62:7e:d8:01:3a:3e:19:14:89:c2:ef:62:a0:
         17:5c:80:2b:24:6b:96:73:fa:b0:8f:4d:09:0e:69:4f:72:f0:
         4d:b1:13:8d:90:4e:18:4b:82:be:fd:48:b0:c2:9d:9c:43:d9:
         d9:73:e6:15:88:79:1f:3e:13:ec:c9:6f:5f:2a:08:7c:a7:5d:
         b4:e1:50:0f:3c:49:e3:e4:9f:8f:dd:e0:b5:b5:2d:d8:2d:29:
         94:2d:4b:66:20:36:f0:ae:3a:ae:a4:c5:91:3c:f4:2a:d6:f5:
         24:ec:7b:3a:96:d6:75:91:f9:b3:1c:8a:93:87:1b:d7:f2:f7:
         72:4d:0c:02:b9:2e:ab:f6:76:ca:c5:74:39:e0:a0:54:2b:85:
         4d:dd:e6:c7:fc:d0:e7:bc:3e:9e:98:19:e5:ed:ad:5f:4b:ea:
         20:17:c5:23:eb:09:ad:8e:13:57:75:78:f9:68:bb:18:34:fc:
         3a:26:94:90:5e:ed:a6:09:bb:14:5c:bd:2e:d3:5b:c4:43:08:
         66:95:e7:ee



DONE

Selecione na lista abaixo o tipo de certificado que deseja criar:

Criando uma solicitação
de assinatura de certificado Criando um certificado

autoassinadoCriando uma solicitação de assinatura de certificado

Uso:

ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_csr [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create certificate signing request for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create certificate signing request for management
                        interface (WEB UI)

Criando um CSR para a interface de dados:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_csr -d
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 192.0.2.1..PASS
Validating IPv4Address: 192.0.2.2..PASS
Validating IPv4Address: 192.0.2.3..PASS
Validating IPv4Address: 192.0.2.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data_private.key
----------------------------------------------------------------------
Certificate Signing Request
----------------------------------------------------------------------

Creating Certificate Signing Request..DONE
Wrote certificate signing request to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data.csr

Criando um CSR para a interface de gerenciamento:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_csr -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 198.51.100.1..PASS
Validating IPv4Address: 198.51.100.2..PASS
Validating IPv4Address: 198.51.100.3..PASS
Validating IPv4Address: 198.51.100.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management_private.key
----------------------------------------------------------------------
Certificate Signing Request
----------------------------------------------------------------------

Creating Certificate Signing Request..DONE
Wrote certificate signing request to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management.csr

Criando um certificado autoassinado

Uso:

ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_ssc [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create self-signed certificate for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create self-signed certificate for management
                        interface (WEB UI)

Criando um certificado autoassinado para a interface de dados:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_ssc -d
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 192.0.2.1..PASS
Validating IPv4Address: 192.0.2.2..PASS
Validating IPv4Address: 192.0.2.3..PASS
Validating IPv4Address: 192.0.2.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data_private.key
----------------------------------------------------------------------
Self-signed certificate
----------------------------------------------------------------------

Creating self-signed certificate..DONE
Wrote Certificate to: /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data.crt
admin@provo-ex3000:~/ecs_certificate_tool-1.0>

Criando um certificado autoassinado para a interface de gerenciamento:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_ssc -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 198.51.100.1..PASS
Validating IPv4Address: 198.51.100.2..PASS
Validating IPv4Address: 198.51.100.3..PASS
Validating IPv4Address: 198.51.100.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management_private.key
----------------------------------------------------------------------
Self-signed certificate
----------------------------------------------------------------------

Creating self-signed certificate..DONE
Wrote Certificate to: /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management.crt

Fazendo upload do seu certificado

Se você estiver usando um certificado autoassinado gerado por essa ferramenta, a chave privada e o certificado já estarão em seu diretório atual.

Se você tiver um certificado assinado por uma CA, carregue-o no ECS e coloque-o no diretório da ferramenta de certificado.

Nota: Se necessário, faça o upload da cadeia completa do certificado (raiz/intermediária) de seu ambiente. Consulte #Example_Certificates se necessário.

Certificado de dados

Comando:

# python ecs_certificate_tool.py upload_certificate -c <path to certificate> -p <path to private key> --data

Exemplo:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ecs_certificate_tool.py upload_certificate -c ./FNM00181300310-data.crt -p FNM00181300310-data_private.key --data     ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Upload Certificate
----------------------------------------------------------------------

Authenticating using configured credentials..PASS

Reading certificate from: ./FNM00181300310-data.crt..DONE
Reading private key from: FNM00181300310-data_private.key..DONE
Verifying the private key matches the certificate..DONE
Uploading the certificate to ECS..DONE

admin@provo-ex3000:~/ecs_certificate_tool-1.0>

Depois de fazer upload do certificado, você terá duas opções:
1. Aguardar 2 horas para que o dataheadsvc propague o novo certificado em todo o cluster.
2. Reiniciar manualmente o dataheadsvc no nó do qual você executou a ferramenta, mas note que isso pode ter um pequeno impacto.

Comando para reiniciar o dataheadsvc:

# sudo kill -9 `pidof dataheadsvc`

Certificado de gerenciamento

Comando:

# python ./ecs_certificate_tool.py upload_certificate -c <path to certificate> -p <path to private key> --management

Exemplo:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py upload_certificate -c ./FNM00181300310-management.crt -p FNM00181300310-management_private.key -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Upload Certificate
----------------------------------------------------------------------

Authenticating using configured credentials..PASS

Reading certificate from: ./FNM00181300310-management.crt..DONE
Reading private key from: FNM00181300310-management_private.key..DONE
Verifying the private key matches the certificate..DONE
Uploading the certificate to ECS..DONE

Depois de fazer upload do novo certificado de gerenciamento, você deve executar reinicializações contínuas de objcontrolsvc/nginx em todo o cluster. Isso pode ter um impacto mínimo sobre o acesso à IU.

1. Gere um arquivo "MACHINES" em todo o cluster:

# sudo getclusterinfo -a /root/MACHINES.VDC && sudo viprscp -f /root/MACHINES.VDC /root/MACHINES.VDC /root/;sudo viprscp -f /root/MACHINES.VDC /root/MACHINES.VDC /home/admin/;sudo viprexec -i -f /home/admin/MACHINES.VDC "pingall; md5sum /root/MACHINES.VDC /home/admin/MACHINES.VDC"

2. Reinicie objcontrolsvc no cluster:

# viprexec -f ~/MACHINES.VDC -i 'pidof objcontrolsvc; kill -9 `pidof objcontrolsvc`; sleep 60; pidof objcontrolsvc'

3. Reinicie o nginx no cluster:

# viprexec -f ~/MACHINES.VDC -i -c "/etc/init.d/nginx restart;sleep 60;/etc/init.d/nginx status"

Certificados de exemplo

Cadeia completa (raiz/intermediária/ECS)

Additional Information

Notas da versão:

12/12/2020     1.0 - Fix outputting when password not configured in config.ini during view_certs operation

02/12/2021     1.1 - Support different hostnames for data/management interfaces #3
                   - Rewrote view_certs so it works if no certs have been uploaded yet. #2
                   - backup original certifiate before uploading new one. #1

04/07/2021     1.2 - nuke certs #10
                   - fix urllib3 warnings
                   - fix logging
                   - output additional info when viewing certs #9
07/06/2021     1.3 - Support 1024/2048/4096 private key sizes #14

09/24/2021     1.4 - #18 - Fix bug in get_issuer
                   - #19 - Remove sudo requirement and force admin user
                   - #23 - Handle Credentials with ?{}|&~![()^"

Ações:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py -h
ecs_certificate_tool v0.9
log_file: /home/admin/ecs_certificate_tool-0.9/certificate_tool.log
 
usage: ecs_certificate_tool.py [-h]
                               {view_certs,generate_san,create_csr,create_ssc,upload_certificate}
                               ...
 
positional arguments:
  {view_certs,generate_san,create_csr,create_ssc,upload_certificate}
                        sub-command help
    view_certs          Shows the current certificates on the data and
                        management interfaces
    generate_san        Generates the subject alternative name IP addresses
                        and domain names from fabric and adds them to the ini
                        config file
    create_csr          Create certificate signing request
    create_ssc          Create self-signed certificate
    upload_certificate  Upload certificate to the data interface
 
optional arguments:
  -h, --help            show this help message and exit

Criar solicitação de assinatura de certificado:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py create_csr -h
ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_csr [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create certificate signing request for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create certificate signing request for management
                        interface (WEB UI)

Criar um certificado autoassinado:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py create_ssc -h
ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_ssc [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create self-signed certificate for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create self-signed certificate for management
                        interface (WEB UI)

Upload do certificado:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py upload_certificate -h
ecs_certificate_tool v0.9
log_file: /home/admin/ecs_certificate_tool-0.9/certificate_tool.log
 
usage: ecs_certificate_tool.py upload_certificate [-h] -c CERTIFICATE -p
                                                  PRIVATE_KEY (-d | -m)
 
optional arguments:
  -h, --help            show this help message and exit
  -c CERTIFICATE, --certificate CERTIFICATE
                        Filepath to the data certificate
  -p PRIVATE_KEY, --private_key PRIVATE_KEY
                        Filepath to private key with no password
  -d, --data            Upload certificate to the data interface
  -m, --management      Upload certificate to the management interface

Os certificados devem ser formatados da seguinte forma:

——BEGIN CERTIFICATE——
host certificate
——END CERTIFICATE——
——BEGIN CERTIFICATE——
intermediate certificate
——END CERTIFICATE——
——BEGIN CERTIFICATE——
root certificate
——END CERTIFICATE——

Affected Products

ECS, ECS Appliance, ECS Appliance Gen 1, ECS Appliance Gen 2, ECS Appliance Gen 3, ECS Appliance Hardware Gen1 U-Series, ECS Appliance Hardware Gen1 C-Series, ECS Appliance Hardware Gen2 C-Series, ECS Appliance Hardware Gen2 D-Series , ECS Appliance Hardware Gen2 U-Series ...

Products

ECS Appliance Hardware Gen3 EX300, ECS Appliance Hardware Gen3 EX3000, ECS Appliance Hardware Gen3 EX500, ECS Appliance Hardware Gen3 EXF900, ECS Appliance Hardware Series, ECS Appliance Software with Encryption , ECS Appliance Software without Encryption ...

Article Number: 000181006

Article Type: How To

Last Modified: 03 Jul 2024

Version: 17

Check if your device is covered by Support Services.

ECS: Ferramenta de certificação SSL de dados e gerenciamento

Summary: A ferramenta de certificado do ECS pode ajudá-lo a fazer upload de certificados SSL para as interfaces de gerenciamento e dados do ECS.

Instructions

Instalação

Configuração

Visualizando os certificados atuais

Selecione na lista abaixo o tipo de certificado que deseja criar:

Criando uma solicitação
de assinatura de certificado Criando um certificado

autoassinadoCriando uma solicitação de assinatura de certificado

Criando um certificado autoassinado

Fazendo upload do seu certificado

Certificado de dados

Certificado de gerenciamento

Certificados de exemplo

Cadeia completa (raiz/intermediária/ECS)

Additional Information

Affected Products

Products

Article Properties

Find answers to your questions from other Dell users

Support Services

Article Properties

Find answers to your questions from other Dell users

Support Services

Welcome

Welcome to Dell

ECS: Ferramenta de certificação SSL de dados e gerenciamento

Summary: A ferramenta de certificado do ECS pode ajudá-lo a fazer upload de certificados SSL para as interfaces de gerenciamento e dados do ECS.

Detailed Article

Instructions

Additional Info

Affected Products

Instructions

Instalação

Configuração

Visualizando os certificados atuais

Selecione na lista abaixo o tipo de certificado que deseja criar:Criando uma solicitaçãode assinatura de certificado Criando um certificado autoassinadoCriando uma solicitação de assinatura de certificado

Criando um certificado autoassinado

Fazendo upload do seu certificado

Certificado de dados

Certificado de gerenciamento

Certificados de exemplo

Cadeia completa (raiz/intermediária/ECS)

Additional Information

Affected Products

Products

Article Properties

Find answers to your questions from other Dell users

Support Services

Article Properties

Find answers to your questions from other Dell users

Support Services

Selecione na lista abaixo o tipo de certificado que deseja criar:

Criando uma solicitação
de assinatura de certificado Criando um certificado

autoassinadoCriando uma solicitação de assinatura de certificado