Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Technologies VxRail：无法更改的 iDRAC 设置

Summary: iDRAC 是 PTAgent 的后端，它在 VxRail Gen3 一体机上提供硬件监视功能。本文介绍 iDRAC 上必需的设置。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

VxRail Manager 的一部分硬件监视功能依赖于与 PTAgent 和 iDRAC 的正确通信。

本文列出了无法更改的默认 iDRAC 设置。
  • OS to iDRAC Pass-through // iDRAC management GUI > Overview > iDRAC settings > Network > OS
    • State： Enabled
    • Pass-through mode： USB NIC
    • USB NIC IP address：169.254.0.1
kA5f10000008YJsCAM_1_0
 
  • Password Settings //  iDRAC management GUI > Overview > iDRAC settings > Users > Global User Settings > Password Settings

image.png
将最小长度更改为大于 9 的值可能会导致 VxRail 无法正确连接到节点，并且 RASR 失败。在对用户密码策略进行任何更改之前，请咨询支持人员。
  • Services // iDRAC management GUI > Overview > iDRAC settings > Network > Services
    • Web Server
      • HTTPS：443
      • SSL Encryption： 128-bits or higher
      • TLS Protocol： TLS 1.1 and higher
    • SSH
      • Status：Enabled
      • Port number：22
kA5f10000008YJsCAM_1_1
  • 远程 RACADM
    • Status：Enabled
kA5f10000008YJsCAM_1_2
4.0.0 - 4.0.310：      
  • iDRAC users // iDRAC management GUI > Overview > iDRAC settings > User Authentication > Local Users
    • Vxadmin 分配为“Administrator”
kA5f10000008YJsCAM_1_3

4.0.400 - 4.5.x：      
  • iDRAC users // iDRAC management GUI > Overview > iDRAC settings > User Authentication > Local Users
    • Vxpsvc 分配为“Administrator”
    • PTAdmin 分配为“Administrator”
kA5f10000008YJsCAM_1_4

上述用户的用户权限：      
kA5f10000008YJsCAM_1_5
  • G560/560F 的特殊需求
iDRAC Settings > Connectivity > Network > Network Settings > NIC Selection = LOM1
iDRAC GUI configuration > BIOS settings > Integrated Devices：Embedded NIC1 = enabled

rtaImage.jpg

kA5f10000008YJsCAM_1_7

**提醒：进行上述更改后，在节点上运行命令“esxcfg-nics -l”以验证嵌入式 NIC 是否显示为 vmnic0。如果不是，则可能需要重置节点的 RASR（请参阅：VxRail：VxRail G560 上的构建验证失败并显示错误消息：“An unknown validation error occurred in VlanLiveValidator”（VlanLiveValidator 中发生未知验证错误），了解更多信息）。

一个正确示例：     
  
#esxcfg-nics -l

Name PCI Device Driver Admin Status Link Status Speed Duplex MAC Address MTU Description ------ ------------ --------- ------------ ----------- ----- ------ ----------------- ---- ------------------------------------------------- vmnic0 0000:04:00.0 igbn Up Up 1000 Full 50:9a:4c:69:41:de 1500 Intel Corporation I350 Gigabit Network Connection <<<<< vmnic1 0000:18:00.0 i40en Up Up 10000 Full 3c:fd:fe:54:8f:e0 1500 Intel(R) Ethernet Controller X710 for 10GbE SFP+ vmnic2 0000:18:00.1 i40en Up Up 10000 Full 3c:fd:fe:54:8f:e2 1500 Intel(R) Ethernet Controller X710 for 10GbE SFP+ vmnic3 0000:5e:00.0 i40en Up Down 0 Half 3c:fd:fe:2d:fd:e0 1500 Intel(R) Ethernet Controller X710 for 10GbE SFP+ vmnic4 0000:5e:00.1 i40en Up Down 0 Half 3c:fd:fe:2d:fd:e2 1500 Intel(R) Ethernet Controller X710 for 10GbE SFP+ vusb0 Pseudo cdc_ether Up Up 10 Half 50:9a:4c:69:3b:27 1500 Unknown Unknown

Affected Products

VxRail Appliance Family

Products

CloudArray Virtual Edition for VxRail Appliance, VxRail 460 and 470 Nodes, VxRail Appliance Series, VxRail G410, VxRail G Series Nodes, VxRail E Series Nodes, VxRail E460, VxRail E560, VxRail E560F, VxRail G560, VxRail G560F, VxRail Gen2 Hardware , VxRail P Series Nodes, VxRail P470, VxRail P570, VxRail P570F, VxRail S Series Nodes, VxRail S470, VxRail S570, VxRail Software, VxRail V Series Nodes, VxRail V470, VxRail V570, VxRail V570F ...
Article Properties
Article Number: 000157690
Article Type: How To
Last Modified: 04 Jan 2023
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.