Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Technologies VxRail：无法更改的 iDRAC 设置

Summary: iDRAC 是 PTAgent 的后端，它在 VxRail Gen3 一体机上提供硬件监视功能。本文介绍 iDRAC 上必需的设置。

This article applies to   This article does not apply to 
Check out resources for

Instructions

VxRail Manager 的一部分硬件监视功能依赖于与 PTAgent 和 iDRAC 的正确通信。

本文列出了无法更改的默认 iDRAC 设置。
  • OS to iDRAC Pass-through // iDRAC management GUI > Overview > iDRAC settings > Network > OS
    • State： Enabled
    • Pass-through mode： USB NIC
    • USB NIC IP address：169.254.0.1
kA5f10000008YJsCAM_1_0
 
  • Password Settings //  iDRAC management GUI > Overview > iDRAC settings > Users > Global User Settings > Password Settings

image.png
将最小长度更改为大于 9 的值可能会导致 VxRail 无法正确连接到节点，并且 RASR 失败。在对用户密码策略进行任何更改之前，请咨询支持人员。
  • Services // iDRAC management GUI > Overview > iDRAC settings > Network > Services
    • Web Server
      • HTTPS：443
      • SSL Encryption： 128-bits or higher
      • TLS Protocol： TLS 1.1 and higher
    • SSH
      • Status：Enabled
      • Port number：22
kA5f10000008YJsCAM_1_1
  • 远程 RACADM
    • Status：Enabled
kA5f10000008YJsCAM_1_2
4.0.0 - 4.0.310：      
  • iDRAC users // iDRAC management GUI > Overview > iDRAC settings > User Authentication > Local Users
    • Vxadmin 分配为“Administrator”
kA5f10000008YJsCAM_1_3

4.0.400 - 4.5.x：      
  • iDRAC users // iDRAC management GUI > Overview > iDRAC settings > User Authentication > Local Users
    • Vxpsvc 分配为“Administrator”
    • PTAdmin 分配为“Administrator”
kA5f10000008YJsCAM_1_4

上述用户的用户权限：      
kA5f10000008YJsCAM_1_5
  • G560/560F 的特殊需求
iDRAC Settings > Connectivity > Network > Network Settings > NIC Selection = LOM1
iDRAC GUI configuration > BIOS settings > Integrated Devices：Embedded NIC1 = enabled

rtaImage.jpg

kA5f10000008YJsCAM_1_7

**提醒：进行上述更改后，在节点上运行命令“esxcfg-nics -l”以验证嵌入式 NIC 是否显示为 vmnic0。如果不是，则可能需要重置节点的 RASR（请参阅：VxRail：VxRail G560 上的构建验证失败并显示错误消息：“An unknown validation error occurred in VlanLiveValidator”（VlanLiveValidator 中发生未知验证错误），了解更多信息）。

一个正确示例：     
  
#esxcfg-nics -l

Name PCI Device Driver Admin Status Link Status Speed Duplex MAC Address MTU Description ------ ------------ --------- ------------ ----------- ----- ------ ----------------- ---- ------------------------------------------------- vmnic0 0000:04:00.0 igbn Up Up 1000 Full 50:9a:4c:69:41:de 1500 Intel Corporation I350 Gigabit Network Connection <<<<< vmnic1 0000:18:00.0 i40en Up Up 10000 Full 3c:fd:fe:54:8f:e0 1500 Intel(R) Ethernet Controller X710 for 10GbE SFP+ vmnic2 0000:18:00.1 i40en Up Up 10000 Full 3c:fd:fe:54:8f:e2 1500 Intel(R) Ethernet Controller X710 for 10GbE SFP+ vmnic3 0000:5e:00.0 i40en Up Down 0 Half 3c:fd:fe:2d:fd:e0 1500 Intel(R) Ethernet Controller X710 for 10GbE SFP+ vmnic4 0000:5e:00.1 i40en Up Down 0 Half 3c:fd:fe:2d:fd:e2 1500 Intel(R) Ethernet Controller X710 for 10GbE SFP+ vusb0 Pseudo cdc_ether Up Up 10 Half 50:9a:4c:69:3b:27 1500 Unknown Unknown

Affected Products

VxRail Appliance Family

Products

CloudArray Virtual Edition for VxRail Appliance, VxRail 460 and 470 Nodes, VxRail Appliance Series, VxRail G410, VxRail G Series Nodes, VxRail E Series Nodes, VxRail E460, VxRail E560, VxRail E560F, VxRail G560, VxRail G560F, VxRail Gen2 Hardware , VxRail P Series Nodes, VxRail P470, VxRail P570, VxRail P570F, VxRail S Series Nodes, VxRail S470, VxRail S570, VxRail Software, VxRail V Series Nodes, VxRail V470, VxRail V570, VxRail V570F ...
Article Properties
Article Number: 000157690
Article Type: How To
Last Modified: 04 Jan 2023
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.