Skip to main content

Technical Specifications of EVGA nForce 680i Motherboards

Summary: Technical information for EVGA nForce 680i motherboards.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Technical Specifications of EVGA nForce 680i (CK-NF68) and XFX nForce 680i SLI Motherboards

If you're dealing with motherboard questions, replacements, or issues, you might find the following resources helpful: the Motherboard Questions, Replacements, and Issues Resolution article provides comprehensive guidance. Additionally, if you need to identify the Piece Part Identification (PPID) number of your Dell computer's motherboard, you can refer to the How to Get the Piece Part Identification (PPID) Number of the Motherboard on a Dell Computer article. For more detailed information, including manuals and documentation for your Dell product, check out the Manuals and Documentation for your Dell Product page.

Motherboard Specifications

  • ATX form factor of 12 inch x 9.6 inch
  • Supported CPUs: Intel Core2 Extreme, Intel Core2 Quad, Intel Core2 Duo, Pentium EE, Pentium D and Pentium 4 (socket 775 versions only)
  • NVIDIA nForce 680i SLI MCP Chipset

System Memory

  • Supports Dual-channel DDR2 800/667/533
  • SLI-Ready Memory up to 1200 MHz
  • Supports up to 8 GB DDR2 memory

Universal Serial Bus

  • Supports hot plugging
  • Ten USB 2.0 ports (six rear panel ports, two onboard USB headers providing four extra ports)
  • Supports wake-up from S1 and S3 mode
  • Supports USB 2.0 protocol up to 480Mbps transmission rate

Storage

  • Onboard Serial ATA II
  • 3Gb/s data transfer rate
  • Six Serial ATA II connectors
  • NVIDIA MediaShield Redundant Array of Inexpensive Disks (RAID) with support for RAID 0, RAID 1, RAID 0+1, RAID 5, and Just a Bunch of Disks (JBOD)
  • Supports hot plug and Native Command Queuing (NCQ)

Local Area Network (LAN)

  • Dual Onboard LAN
  • Two LAN interfaces built-in onboard
  • Supports 10/100/1000 Mbit/sec Ethernet

IEEE 1394 (FireWire)

  • Supports hot plugging
  • Two 1394a ports with rate of transmission at 400 Mbps
  • Installing and Configuring the EVGA nForce 680i SLI Motherboard

Onboard Audio

  • Supports 8-channel audio
  • Supports S/PDIF output
  • Supports Jack-Sensing function

Expansion Slots

  • Two PCI slots
  • Two PCI Express x1 slots
  • Two PCI Express x16 Graphics slots
  • One PCI Express x16 Graphics Expansion slot (electrical x8)

Article Properties
Article Number: 000152876
Article Type: How To
Last Modified: 06 Feb 2025
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.