Installing .NET 3.5 Framework on Microsoft Windows Server 2012
Summary: Dell OS and Applications Solutions on Dell TechCenter - Project Sputnik, Microsoft Windows, Red Hat Linux, SUSE, Ubuntu, and more
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
This blog post was originally written by Michael Schroeder.
Comments are welcome! To suggest a blog topic or make other comments, contact WinServerBlogs@dell.com.
Today, there are a lot of applications and utilities available that leverage the .NET 3.5 framework to function properly. With Windows Server 2012, Microsoft provides both the .NET 3.5 and 4.5 install options for any of your applications’ requirements. When installing the .NET 3.5 components, you must pay careful attention to a few details.
When using Server Manager to install the .NET 3.5 feature you may run into the following message indicating the source files could not found:
Figure 1: Server Manager to install the .NET 3.5
Using PowerShell to install, we see a similar message stating "The source files could not be downloaded" along with the error 0x800f0906. In my case, the server is not connected to the internet to access the Windows Update servers.
Figure 2: PowerShell to install message
Going back and looking more closely at the Add Roles and Features wizard, you’ll see a warning at the top asking the following and also providing a "Specify an alternate source path" link at the bottom of the wizard.
Figure 3: Specify an alternate source path
Why do we need to provide source files for this feature and not others? After running the following PowerShell command on a Full GUI install, we see the install state is set to "Removed" for these components. The "Removed" install state indicates that the feature files are not available on the local server. This is the default for all editions of Windows Server 2012.
Figure 4: PowerShell command on a Full GUI
3. Using DISM from the command prompt, specify the source files path parameter:
4. Using a file share containing the sxs folder, specify the unc share path:
Comments are welcome! To suggest a blog topic or make other comments, contact WinServerBlogs@dell.com.
Today, there are a lot of applications and utilities available that leverage the .NET 3.5 framework to function properly. With Windows Server 2012, Microsoft provides both the .NET 3.5 and 4.5 install options for any of your applications’ requirements. When installing the .NET 3.5 components, you must pay careful attention to a few details.
When using Server Manager to install the .NET 3.5 feature you may run into the following message indicating the source files could not found:
Figure 1: Server Manager to install the .NET 3.5
Using PowerShell to install, we see a similar message stating "The source files could not be downloaded" along with the error 0x800f0906. In my case, the server is not connected to the internet to access the Windows Update servers.
Figure 2: PowerShell to install message
Going back and looking more closely at the Add Roles and Features wizard, you’ll see a warning at the top asking the following and also providing a "Specify an alternate source path" link at the bottom of the wizard.
Figure 3: Specify an alternate source path
Why do we need to provide source files for this feature and not others? After running the following PowerShell command on a Full GUI install, we see the install state is set to "Removed" for these components. The "Removed" install state indicates that the feature files are not available on the local server. This is the default for all editions of Windows Server 2012.
Figure 4: PowerShell command on a Full GUI
For those servers without a WSUS server present or a connection to Windows Update, where the necessary components can be retrieved, we’ll need to provide an alternate source path to the side-by-side store (sxs) on the Windows Server installation media to complete the feature installation.
We can choose one of the following installation methods:
1. Using the Add Roles and Features Wizard, specify an alternate source path using the link at the bottom of the wizard. For example, D: is my Windows Server DVD media.
| D:\Sources\sxs |
2. Using PowerShell, specify the source files path when installing.
| Install-WindowsFeature NET-Framework-Core –Source D:\Sources\sxs |
3. Using DISM from the command prompt, specify the source files path parameter:
| DISM /Online /Enable-Feature /FeatureName:NetFx3 /Source:d:\sources\sxs |
4. Using a file share containing the sxs folder, specify the unc share path:
| Install-WindowsFeature NET-Framework-Core –Source \\ServerName\ShareName\sxs |
Additional Resources:
TechNet: Install or Uninstall Roles, Role Services, or Features
Article Properties
Article Number: 000147619
Article Type: Solution
Last Modified: 21 Feb 2021
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.