The Precision 7730 Mobile Workstation comes with a wide variety of hardware configurations and the connectors to swap out or add to the configuration that shipped from Dell. The following table and graphic show where each connector is located and what part connects to it.
(Fig.1 The Open Base of the Precision 7730 mobile workstation)
1 | CMOS Battery | In the middle of the system between the left side fan and battery | 2 | NVMe Drive Bay | Directly below the left side fan |
3 | NVMe Drive Bay | Between the NVMe bay and the M.2 bay on the left side of the base | 4 | 2.5" Drive Bay (Optional with no M.2 drive and smaller battery) | Replaces M.2 bay and battery on the left side bottom corner |
5 | M.2 Drive Bay | The bottom-left side corner of the system next to the battery | 6 | Primary Battery | Along the bottom of the system |
7 | Primary Memory Slot | To the left side of the center of the system | 8 | Secondary Memory Slot | To the right side of the center of the system |
9 | NVMe Drive Bay | To the right side of the second memory bay on the base | 10 | WLAN Card Slot | To the left of the right side fan in the system |
11 | WWAN Card Slot | Between the left side fan and the WLAN card slot | 12 | SIM Card Slot | Between the WLAN card and the top edge of the system |