Please follow the instructions in this article in order to swap out the battery of a PowerVault MD3000 and MD3000i.
1. Set the Controller Offline
- a. Please open the "Modular Disk Storage Manager" and connect to the Storage which shows the Failure.
- b. Than click the "TAB Support".
- c. In the Menue click "Manage RAID Controller Modules".
- d. Now click "Place RAID Controller Module Offline".
- e. Now you have to choose the correct Controller in the Drop Down Menu and press "OK".
2. Swap the Battery
- a. Remove the Controller which is Offline
- b. Release the Screw on the Backside and the Side of the Controller.
- c. Open the Cover and release the Battery-Screw. Than you can remove the Battery.
- d. To assemble the new Battery use the inverse Way and set the Controller Online.
3. Set the Controller Online
- a. Please open the "Modular Disk Storage Manager" and connect to the Storage which shows the Failure.
- b. Than click the "TAB Support".
- c. In the Menue click "Manage RAID Controller Modules".
- d. Now click "Place RAID Controller Module Online".
- e. Now you have to choose the correct Controller in the Drop Down Menu and press "OK".