Achtergrond:
Met de introductie van het Dell Networking Operating System 6.5.x.x voor N serie Campus Switching Platforms wordt Mixed stacking ondersteund tussen:
- N2000 en N2128PX-ON
- N3000 en N3132PX-ON
- N3000 en N3000E-ON
Firmwarerevisie:
Firmwarerevisies voor Mixed Stacking zijn:
- Advanced Lite (N3000 en N3132PX-ON) of (N3000 en N3000E-ON)
- L3-routing, stapelt tot acht eenheden, VLAN'S: 1024, geen MMRP/MVRP
- Inclusief BGP
- N3000N3100AdvLitev6.5.1.x.itb N3000/N3048EP-ON/N3132PX-ON mixed stack
- N3000AdvLitev6.5.1.x.stk Dauntless L3 only stack (incl. N3048EP-ON)
- Standard (N2000 en N2128PX-ON)
- L2 switching/routing op beperkte schaal, stapelt tot twaalf units
- N2000N2100Stdv6.5.1.x.itb N2000/N2100 mixed stack
- N2100Stdv6.5.1.x.stk Bristol L2 only stack
- N2000Stdv6.5.1.x.stk Dauntless N2000 only stack
- Advanced (N3132PX-ON en N3000E-ON)
- Full scale routing, stapelt tot twaalf units, VLAN's: 4093, MMRP/MVRP
- Inclusief BGP
- N3000N3100Advv6.5.1.x.itb N3000E/N3132PX-ON mixed stack
- N3100Advv6.5.1.x.stk N3132PX-ON L3 only stack
- N3000Advv6.5.1.x.stk N3000E only stack
Voorbeelden van mixed stacking bestanden voor de N3000/N3132PX-ON serie:
- N3100AdvLitev6.5.1.1.stk
- N3100Advv6.5.1.31.stk
- N3000AdvLitev6.5.1.1.stk
- N3000Advv6.5.1.31.stk
- N3000N3100AdvLitev6.5.1.1.itb
- N3000N3100Advv6.5.1.31.itb
De .stk-bestanden zijn niet nieuw voor de Dell Networking Campus productserie, de nieuwe bestandsindeling .itb wordt gebruikt om de beide N3000/N3132PX-ON-switches in een mixed stack te ondersteunen. Dit .itb-bestand bevat bestandsimages voor beide switches. Dit is de bestandsindeling die voor alle toekomstige mixed stacking firmware-updates wordt gebruikt.
Procedure:
Opmerking: Het instellen van een mixed stacking-omgeving is een proces van meerdere stappen met enkele bekende beperkingen voor de N3000/N3132PX-ON- en N3000/N3000E-ON serie switches
- De stackomvang moet worden verlaagd van het maximale aantal van 12 switches naar 8
- Alleen 1024 actieve VLAN's in een configuratiebereik van 1-4093
Procedure voor mixed stacking-update:
- Maak een back-up van uw switchconfiguratie.
- N3000 serie switches gebruiken eerst het N3000AdvLitev6.5.1.x.stk-bestand.
- Kopieer en activeer het .stk-bestand naar de N3000 serie switches.
- Werk de opstartcode en CPLD bij in geval van lagere dan de huidige versies en laad de switches opnieuw.
- Alle switches in de stack moeten nu een actieve 6.5.1.x-image weergeven na de opdracht "show version".
- Kopieer en activeer ten slotte de N3000N3132PX-ONAdvLitev6.5.1.x.itb-image naar de N3000 serie switches.
- De N3132PX-ON serie switches volgen dezelfde procedure als de N3000-switches.
- Wanneer beide sets switches 6.5.1.x hebben, schakelt u beide serie switches uit. Sluit mini-SAS-stackingkabels aan. Schakel beide series switches in.
- Controleer de connectiviteit met de opdrachten "show switch" en "show version" via de stack master.
Opmerking: Raadpleeg het document
Upgrading Dell EMC Networking N3000 Series Switches to 6.5.1.x Firmware dat deel uitmaakt van het N3000 serie, firmwareversie 6.5.1.x zip-bestand
dat hier beschikbaar is.