下文介绍错误“The System board BP1 PG voltage is outside of range”
采用较大配置的 PowerEdge R740/R740XD(或 XC740 系列)服务器
症状
R740/R740XD/XC740 PowerEdge 服务器的系统事件日志 (SEL) 中可能会显示以下消息。
“The System board BP1 PG voltage is outside of range”
图 1:系统主板的 BP1 PG 电压超出范围
解决方案
此问题已
在 CPLD 版本 1.0.6 及更高版本中得到修复。
注:CPLD 版本 1.1.3 现已在 Web 上发布,其中包括额外的增强功能/问题修复。建议今后使用 CPLD 版本 1.1.3 或更高版本。
更新 CPLD 的分步说明:
1.转至戴尔支持网站。
2.输入服务标签或手动选择型号。
3.访问该“驱动程序和下载”菜单
4.在关键字框中键入“CPLD”
5.找到并下载最新的 CPLD 更新。
6.将此文件上传到 iDRAC 的更新和回滚部分,以便更新 CPLD 的固件(服务器将需要重新启动)
有关如何更新 iDRAC 的详细信息,请参阅如何使用 iDRAC 进行远程固件更新?
注:CPLD 更新只能自行应用,而不是与其他更新(例如 BIOS、iDRAC 等)一起应用。