Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

A Guide to the Carry Methods for the Latitude Rugged Tablets

Summary: The following article is a guide to the installation of the various methods provided to carry the Dell Rugged Tablets.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

Table of Contents:

  1. Introduction
  2. Rigid Handle Installation
  3. Soft Handle Installation
  4. Chest Harness Installation
  5. Shoulders Strap Installation

Introduction

 

This article shows the various carry methods supplied for the Latitude Rugged Tablets and the installation method to fit them to the tablet. These items are optional extras.

  • Latitude 7202 Rugged Tablet
  • Latitude 7212 Rugged Extreme Tablet
  • Latitude 7220 Rugged Extreme Tablet

Rigid Handle Installation

 

The rigid handle is a solid piece of ruggedized plastic that attaches to the top of the Tablet:

Note: Ensure that the Stylus is removed from the tablet before you attempt to fit the handle. The stylus slides into the handle instead, once it is fitted.
  1. Locate the rigid handle to the two accessory connection points on the top edge of the Tablet. Use a screwdriver to lock the handle in place.

    fit the Rigid Handle

  2. Ensure that the handle is fitted with the space for the stylus accessible from the right-hand side of the tablet.

    Slide pen in Rigid Handle


Soft Handle Installation

 

The soft handle is a flexible piece of ruggedized plastic that attaches to the top of the Tablet:

  1. Locate the soft handle to the two bars on either side of the top edge of the Tablet.

    Soft Handle

  2. Pass the thread loop on the end of the soft handle through the bar on the side of the tablet.

    Close up shot of the corner and the end of the soft handle

  3. Pull the thread loop back up through the bracket on the end of the soft handle and hook the end of the loop over the hook in the bracket and pull it tight.

    fitting each end of the soft handle


Chest Harness Installation

 

The chest harness is a flexible piece of ruggedized plastic that attaches to each corner of the Tablet:

  1. Locate the ends of the chest harness to the four (4) bars on each corner of the Tablet.

    Chest Harness

  2. Pass the thread loop on the end of each harness strap through the bar on each corner of the tablet.

    close up shot of one end of the harness strap and the corner of the tablet

  3. Pull the thread loop back up through the bracket on the end of the strap and hook the end of the loop over the hook in the bracket and pull it tight.

    how to fit each corener to the harness


Shoulders Strap Installation

 

The shoulder strap is a flexible piece of ruggedized plastic that attaches to the Tablet:

  1. Locate the strap to two bars on either side of one of the edges of the Tablet.

Shoulder Strap

Note: You can locate the strap to whichever edge of the tablet suits your needs best:

Horizontal Shoulder Strap

Vertical Shoulder Strap

  1. Pass the thread loop on the end of the strap through the bar on the side of the tablet that you have chosen.

    Close up shot of one end of the strap and the bar at the corner of the tablet

  2. Pull the thread loop back up through the bracket on the end of the strap and hook the end of the loop over the hook in the bracket and pull it tight.

    Attaching the strap end to the bar


Back to Top

Affected Products

PC & Tablet Accessories, Latitude 7212 Rugged Extreme Tablet, Latitude 7220 Rugged Extreme Tablet, Latitude 7202 Rugged Tablet
Article Properties
Article Number: 000137470
Article Type: How To
Last Modified: 08 Nov 2024
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.