This article shows the various carry methods supplied for the Latitude Rugged Tablets and the installation method to fit them to the tablet. These items are optional extras.
The rigid handle is a solid piece of ruggedized plastic that attaches to the top of the Tablet:
Locate the rigid handle to the two accessory connection points on the top edge of the Tablet. Use a screwdriver to lock the handle in place.
Ensure that the handle is fitted with the space for the stylus accessible from the right-hand side of the tablet.
The soft handle is a flexible piece of ruggedized plastic that attaches to the top of the Tablet:
Locate the soft handle to the two bars on either side of the top edge of the Tablet.
Pass the thread loop on the end of the soft handle through the bar on the side of the tablet.
Pull the thread loop back up through the bracket on the end of the soft handle and hook the end of the loop over the hook in the bracket and pull it tight.
The chest harness is a flexible piece of ruggedized plastic that attaches to each corner of the Tablet:
Locate the ends of the chest harness to the four (4) bars on each corner of the Tablet.
Pass the thread loop on the end of each harness strap through the bar on each corner of the tablet.
Pull the thread loop back up through the bracket on the end of the strap and hook the end of the loop over the hook in the bracket and pull it tight.
The shoulder strap is a flexible piece of ruggedized plastic that attaches to the Tablet:
Locate the strap to two bars on either side of one of the edges of the Tablet.
Pass the thread loop on the end of the strap through the bar on the side of the tablet that you have chosen.
Pull the thread loop back up through the bracket on the end of the strap and hook the end of the loop over the hook in the bracket and pull it tight.