This article discusses about the steps to configure SNMP on Dell N series switch.
SNMP Manager
SNMP Agent
Community String
Switch Commands | Description |
Console#Configure | To enter into switch configuration mode |
Console(Config)#snmp-server community "community string" ro/ rw | Create the community string and specify if management stations have read only (Get status configuration) or read/write (get and set configuration) |
Console(Config)#snmp-server enable traps all | Enables traps to be sent to management station upon being triggered |
Console(Config)#snmp-server host xx.xx.xx.xx "community string" | Configures the host and community string that traps are sent to upon triggered event |
Console#configure
console(config)#snmp-server community test ro
console(config)#show snmp
Community-String Community-Access View Name IP Address IP Mask
-------------------- ---------------- ---------------- ---------------- ----------------
test Read Only Default All All
Community-String Group Name IP Address IP Mask
-------------------- ------------------------------ ---------------- ----------------
test DefaultRead All All