How to export the PERC Controller Debug Log via the BIOS RAID Controller
Summary: This article explains how to export the RAID controller log (TTY log) directly from RAID Controller (PERC).
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
This article explains how to export the RAID controller log (TTY log) directly from RAID Controller (PERC).
In addition to this,you can also export the RAID controller log (TTY log ) from OMSA (OpenManage Server Administrator) using the interface or using the command lines .
Please see the detail in "OMSA (OpenManage Server Administrator) using the interface or using the command lines"
Note: The PERC controller debug log is also known as a TTY log among Technical Support.
Please prepare a USB flash disk to save the log.
The following steps works for PERC8/PERC9/PERC10. This example uses a PERC10-H740.
- Click F2 to enter the system BIOS.
- Choose Device Settings
- Choose Integrated RAID Controller
- Choose Main Menu
- Choose Controller Management
- Go to the bottom of the page and choose Advanced Controller Management
- Choose Save Debug Log
- Select the location and enter the file name then choose Save Log
- Click ok
Cause
-
Resolution
-
Affected Products
PowerEdgeArticle Properties
Article Number: 000134783
Article Type: Solution
Last Modified: 30 Sep 2021
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.