Dell EMC Solution for Microsoft Azure Stack HCIを導入して構成した後、ネットワーク スイッチのDCBXの動作状態がダウンと表示されることがあります。これは、次のコマンドを実行して確認できます。
show interfaces tengigabitethernet x/y pfc detail. TOR1#show interfaces tengigabitethernet 1/5 pfc detail Interface TenGigabitEthernet 1/5 Admin mode is on Admin is enabled, Priority list is 3 Remote is disabled Local is enabled, Priority list is 3 Oper status is init PFC DCBX Oper status is Down Reason: Waiting for Peer State Machine Type is Symmetric TLV Tx Status is enabled PFC Link Delay 65535 pause quntams Application Priority TLV Parameters : -------------------------------------- FCOE TLV Tx Status is enabled ISCSI TLV Tx Status is disabled Local FCOE PriorityMap is 0x8 Local ISCSI PriorityMap is 0x0 1581 Input TLV pkts, 8649 Output TLV pkts, 121 Error pkts, 4495543 Pause Tx pkts, 374345 Pause Rx pkts 0 Input Appln Priority TLV pkts, 0 Output Appln Priority TLV pkts, 0 Error Appln Priority TLV Pkts
Dell EMC Storage Spaces Direct Ready Nodeの導入ガイダンスの一環として、Mellanox CX4 LXアダプターを使用してRDMA用RoCE v2を使用するインフラストラクチャでは、ホストOSでDCBXをグローバルに無効にし、ネットワーク アダプターDCBXModeを担当ホストに設定することをお勧めします。この構成では、Dell EMCネットワーキング スイッチとDCBX情報を交換しているダウン ストリーム エンティティーが存在しないため、DCBXの動作ステータスはサーバー向けポートでダウンとして表示されます。